T86 Grease/Oil Pressure Quantitative Dispenser

Short Description:

Also called volumetric type, it is a pressurized action type. The pressure grease delivered by the lubrication pump pushes the piston in the measuring piece, and the grease that has been stored in the chamber of measuring part forcibly pressur to the lubrication point. When the system is unloaded, re-storage the grease in the chamber to prepare for the next work.

The system must be operated intermittently and the associated lubrication pump must have an unloading function.
The lubrication pump has a working cycle, the measuring parts only make oil once, and the distance between the measuring parts is far, near, high, low, horizontal or verticalhas no influence for oil outlet.

Accurate measurement, quick action , Smooth drain, the check valve prevents oil from flowing back.


Product Detail

Product Tags

Model No. Number of Outlet Working Pressure Apply oil Standard Flow can choose (ml/cyc) Mark d (d1) Mounting hole A B H H1 D L
T8615* 1 2.0 Mpa 32-1300cst A(0.03)           B(0.06)              C(0.10)                  D(0.16) 3
6
10
16
M10X1 / / / / / / /
T8616* 2 3-Φ5.5 36 13.5 58 18 Φ16 46
T8617* 3 2-Φ5.5 17 15.5 63
T8619* 4 34 80
T8618* 5 51 97
T8621* 1 A(0.10)           B(0.20)              C(0.40)                  D(0.60) 10
20
40
60
M12X1.25 / / / / / / /
T8622* 2 6 / 17 72 17 Φ18 46
T8623* 3 2-Φ6 17 63
T8620* 4 34 80
T8624* 5 51 97
T8625* 1 A(0.20)           B(0.40)              C(0.60)                  D(1.00)  E(1.50) 20
40
60
100
150
/ / / / / / /
T8626* 2 6 / 16 86 18 Φ18 50
T8627* 3 2-Φ6 21 71
T8629* 4 42 92
T8628* 5 63 113

The working principle

●The lubricant oil delivered under pressure from the oil pump causes the umbrella valve in the metering piece to move upward.

●After closing the center hole of the piston rod, the piston is forced to overcome the spring force and start to rise, and the oil originally stored in the upper cavity is discharged out. When the piston moves to the top of the upper chamber, the oil drain is completed at the same time.

●When the oil pump stops working, its pressure relief valve opens by itself, so that the pressure oil in the main oil pipe is relieved by the pressure relief valve. The piston in the metering piece starts to recover under the action of the spring. When the umbrella valve returns to the original sealing the reset port and the metering piece enters Oil port, the piston presses the oil stored in the lower cavity to the upper cavity through the small hole of the piston rod to prepare for the next oil supply.

The system must be operated intermittently and the associated lubrication pump must have an unloading function.
The lubrication pump has a working cycle, the measuring parts only make oil once, and the distance between the measuring parts is far, near, high, low, horizontal or verticalhas no influence for oil outlet.
Accurate measurement, quick action , Smooth drain, the check valve prevents oil from flowing back.


  • Previous:
  • Next:

  • Write your message here and send it to us