Synthetic Gear Lube

"Sincerity, Innovation, Rigorousness, and Efficiency" is definitely the persistent conception of our corporation to the long-term to establish alongside one another with customers for mutual reciprocity and mutual profit for Synthetic Gear Lube, Waste Oil Transfer Pump, Dowty Hydraulic Pump, Bosch Hydraulic Pumps, We sincerely hope to determine some satisfactory interactions with you in the in the vicinity of long term. We'll hold you informed of our progress and stay up for building steady small business relations along with you. To regularly increase the management program by virtue from the rule of "sincerely, good religion and high quality are the base of enterprise development", we greatly absorb the essence of linked products internationally, and constantly produce new goods to satisfy the calls for of shoppers for Synthetic Gear Lube, Our items have national accreditation requirements for qualified, high quality products, affordable value, was welcomed by people today all over the world. Our goods will continue to enhance within the order and look forward to cooperation with you, Should any of these products be of interest to you, please letus know. We are going to be content to offer you a quotation up on receipt of your detailed needs.


  • Newly Arrival Lubricating Oil System - Hoses, Tubes And Fittings – Jianhe

    Newly Arrival Lubricating Oil System - Hoses, Tubes And Fittings – Jianhe

    Hydraulic Lubrication Hose(Grease Hose) Characteristics ● High pressure hose with grease is equipped with the screw sleeve (threaded sleeve) and a hose stud (pipe fitting)at its respective line ends and thus ready for connection ● Cost savings, the hose can be taken according to the actual length of use. ● For the installation of the screw sleeve and the hose stud, the mechanic will require no special tools. Easy to disassemble and assemble. Tighten the nut. ●Composite resin hose: This ...
  • OEM China Lubricating Systems - Hoses, Tubes And Fittings – Jianhe

    OEM China Lubricating Systems - Hoses, Tubes And Fittings – Jianhe

    Hydraulic Lubrication Hose(Grease Hose) Characteristics ● High pressure hose with grease is equipped with the screw sleeve (threaded sleeve) and a hose stud (pipe fitting)at its respective line ends and thus ready for connection ● Cost savings, the hose can be taken according to the actual length of use. ● For the installation of the screw sleeve and the hose stud, the mechanic will require no special tools. Easy to disassemble and assemble. Tighten the nut. ●Composite resin hose: This ...
  • Cheapest Factory Rotary Oil Pump - Electric Grease Centralized Lubrication Pump – Jianhe

    Cheapest Factory Rotary Oil Pump - Electric Grease Centralized Lubrication Pump – Jianhe

    Specification Working Pressure: 25MPa; Rated Discharge: 1-3 outlet (5.5 cc/min) ;4-6outlet (2cc/min) for each outlet; Power Supply (Voltage): 12VDC ,24VDC, 220VAC, 380VAC, Motor Input:24VDC/ 50W 12VDC;Motor Input:12VDC/ 50W; 24VDC/ 220VAC/ 380VAC;Motor Input:24VDC/ 50W; Number of Outlet: 1-6 outlet Reservoir Capacity: 2,4,6 litres. Outlet Screw: M10*1(Customised let we know ) Grease Viscosity : NLGI 000#—2# Working Temperature scope : -25℃ – +55℃ l Working environment tem...
  • 100% Original Hydrolic Pump - M22*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    100% Original Hydrolic Pump - M22*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Performance and characteristics 1. This pump unit series is specially designed for the pump unit of the electric piston pump. 2, The flow rate is 0.12,0. 16, 0. 20 ml/cyc 3. Nominal Pressure 20 MPa. The highest working pressure: 35MPa. (can adjust) 4.7.Applicable Medium :NLGI NO # 000-2 3.Pump Unit Install drawing  Specification  No. Plunger Diameter Nominal Pressure Pump unit flow rate Connection thread ZS-1 (K-6) Φ 6 20Mpa 0.12 ml/cyc M22*1.5 ZS-2 (K-6) Φ 7 0.16 ml/cyc M22*1.5 ZS...
  • OEM/ODM Factory Tyrone Hydraulic Pump - HTD Series Electric Lubrication Pump – Jianhe

    OEM/ODM Factory Tyrone Hydraulic Pump - HTD Series Electric Lubrication Pump – Jianhe

    (2).Technical parameters and performance Motor rated speed Voltage Motor Power Standard pressure Max pressure No-load flow Volumetric efficiency oil viscosity Filtration accuracy Oil tank volume 1350rpm 110V 220V 380V 35W 20W 2.0 MPa 4.5 MPa 100ml/min 160ml/min Ref “P-Q “curve 20~2000cst 90μ 2L 3L 4L   Note: For motor voltage, please refer to the voltage label in the electric lubrication pump. (3).Appearance and installation dimensions (4).Pro...
  • China New Product Oilgear Pvwh Pump - Spring Sheath Use For Oil lubrication system – Jianhe

    China New Product Oilgear Pvwh Pump - Spring Sheath Use For Oil lubrication system – Jianhe

    Description  Spring sheath use for Oil lubrication system Use for all Poor environment Applicable temperature: -10 °C-80 °C Advantage : High strength, stable elasticity, good hardness, full density without gaps, a single 30 cm can be upright following the movement of the wire-carrying guide of the use equipment, which can effectively protect the tubing from high temperature cutting and abrasion. Specification  Type Inner Dia mm  Out Dia mm  spring material diameter  Weight TH-4 4.4 5.6 ...
  • factory customized Plunger Grease Lubrication Systems - LSG 500CC/800CC  hand grease pump – Jianhe

    factory customized Plunger Grease Lubrication Systems - LSG 500CC/800CC hand grease pump – Jianhe

    Principle: The grease is sent to the oil separator through the reciprocating operation of the handle to distribute the grease to each lubrication point. Advantages:small and light, strong durability. Uses :Widely used in various mechanical equipment. Remarks: This pump has only one M10*1 (6mm tubing) oil outlet. Specification TYPE  OUTPUT  CAPACITY Press Max (MPa)  Apply grease  LSG-05 2CC/CY (2ML/MIN) 500 CC 10MPa 0# 00# 00# LSG-08 2CC/CY (2ML/MIN) 800 CC 10MPa Notice Hand-op...
  • China Factory for White Hydraulic Pump - T86 Grease/Oil Pressure Quantitative Dispenser – Jianhe

    China Factory for White Hydraulic Pump - T86 Grease/Oil Pressure Quantitative Dispenser – Jianhe

    Model No. Number of Outlet Working Pressure Apply oil Standard Flow can choose (ml/cyc) Mark d (d1) Mounting hole A B H H1 D L T8615* 1 2.0 Mpa 32-1300cst A(0.03)           B(0.06)              C(0.10)                  D(0.16) 3 6 10 16 M10X1 / / / / / / / T8616* 2 3-Φ5.5 36 13.5 58 18 Φ16 46 T8617* 3 2-Φ5.5 17 15.5 63 T8619* 4 34 80 T8618* 5 51 97 T8621* 1 A(0.10)           B(0.20)              C(0.40)                  D(0.60) 10 20 40 60 M12X1.25 / / / / / / / T8622* ...