Sump Pump Oil

While using the "Client-Oriented" organization philosophy, a rigorous top quality command process, highly developed production devices and a potent R&D workforce, we normally provide high quality products, outstanding solutions and aggressive charges for Sump Pump Oil, Gear Pump Manufacturer, Auto Oil Pumps, Hydraulic Pump Motor, We're going to make higher efforts that can help domestic and international potential buyers, and produce the mutual advantage and win-win partnership between us. we're eagerly waiting for your sincerely cooperation. The client satisfaction is our primary concentrate on. We uphold a consistent level of professionalism, top quality, credibility and service for Sump Pump Oil, Upon today, we've customers from all over the world, including USA, Russia, Spain, Italy, Singapore, Malaysia, Thailand, Poland, Iran and Iraq. The mission of our company is to provide the highest quality products with best price. We've been looking forward to doing business with you.


  • Super Lowest Price Lubrication Pumps/9900 - BE2232 Series Electric Oil/Grease Lubrication Pump(GEAR TYPE) – Jianhe

    Super Lowest Price Lubrication Pumps/9900 - BE2232 Series Electric Oil/Grease Lubrication Pump(GEAR TYPE) – Jianhe

    NAME FULL SET CENTRAL LUBRICATION PUMP MODEL NO. BE2232 TYPE  MATERIAL  DIE-CAST ALUMINUM +RESIN MATERIAL ORIGINAL  ZHEJIANG,,JIAXING  FEATURE LONG LIFE   Specification Model Structure Flow  (ml/min) Max pressure       (kgf/cm2) Lubricating point Oil Viscosity (mm2/s) Low oil level reminders Motor  Tank volume (L) Weight Votage   power  (W) frequency(HZ) BE2232-1.5 Automatic With  timer or without timer 100-150 15-17 1-180 30-1200 Have  AC110V/   AC220V 28 50/60 1.5 2.4...
  • OEM/ODM Manufacturer Robotic Parking System - Hoses, Tubes And Fittings – Jianhe

    OEM/ODM Manufacturer Robotic Parking System - Hoses, Tubes And Fittings – Jianhe

    Hydraulic Lubrication Hose(Grease Hose) Characteristics ● High pressure hose with grease is equipped with the screw sleeve (threaded sleeve) and a hose stud (pipe fitting)at its respective line ends and thus ready for connection ● Cost savings, the hose can be taken according to the actual length of use. ● For the installation of the screw sleeve and the hose stud, the mechanic will require no special tools. Easy to disassemble and assemble. Tighten the nut. ●Composite resin hose: This ...
  • Online Exporter Central Lubrication - RH Oil Pressure Volumetric Distributor – Jianhe

    Online Exporter Central Lubrication - RH Oil Pressure Volumetric Distributor – Jianhe

    The Specifications And Technical Parameters Model No. Outlet  Oil Standard Working Pressure (Mpa) *Discharge Oil Size Mark Outsize 1 2 3 4 L A  Oil flow (ml/time) /Mark  RH-3200 2way  32-1300cst 1.0-2.0 0.1/10 0.2/20 0.3/30 0.4/40 39 49 RH-3300 3way  54 64 RH-3400 4way  72 82 RH-3500 5way  84 94 •The volumetric distributor is a pressure-reducing action type,the pressure oil delivered by the lubrication pump pushes the piston in the metering part, and the oil is stored ...
  • Factory selling Lincoln Industrial - RH Oil Pressure Volumetric Distributor – Jianhe

    Factory selling Lincoln Industrial - RH Oil Pressure Volumetric Distributor – Jianhe

    The Specifications And Technical Parameters Model No. Outlet  Oil Standard Working Pressure (Mpa) *Discharge Oil Size Mark Outsize 1 2 3 4 L A  Oil flow (ml/time) /Mark  RH-3200 2way  32-1300cst 1.0-2.0 0.1/10 0.2/20 0.3/30 0.4/40 39 49 RH-3300 3way  54 64 RH-3400 4way  72 82 RH-3500 5way  84 94 •The volumetric distributor is a pressure-reducing action type,the pressure oil delivered by the lubrication pump pushes the piston in the metering part, and the oil is stored ...
  • Super Lowest Price Grease Fittings - BE2232 Series Electric Oil/Grease Lubrication Pump(GEAR TYPE) – Jianhe

    Super Lowest Price Grease Fittings - BE2232 Series Electric Oil/Grease Lubrication Pump(GEAR TYPE) – Jianhe

    NAME FULL SET CENTRAL LUBRICATION PUMP MODEL NO. BE2232 TYPE  MATERIAL  DIE-CAST ALUMINUM +RESIN MATERIAL ORIGINAL  ZHEJIANG,,JIAXING  FEATURE LONG LIFE   Specification Model Structure Flow  (ml/min) Max pressure       (kgf/cm2) Lubricating point Oil Viscosity (mm2/s) Low oil level reminders Motor  Tank volume (L) Weight Votage   power  (W) frequency(HZ) BE2232-1.5 Automatic With  timer or without timer 100-150 15-17 1-180 30-1200 Have  AC110V/   AC220V 28 50/60 1.5 2.4...
  • Chinese wholesale Ls1 Oil Pump - MVB Progressive Systems Metering Devices   – Jianhe

    Chinese wholesale Ls1 Oil Pump - MVB Progressive Systems Metering Devices – Jianhe

    The MVB series progressive distributor is designed for small-size progressive lubrication systems. They are a cost efficient solution for supplying multiple lubrication points with relatively small volumes of oil and grease. The MVB series can be used with machine tools, processing machinery, presses, textile, printing and packaging machinery. The MVB is also suitable for mobile applications, including off-road equipment. 1 Oil Outlet  MVB Standard Flow : 0.17ml 2 Distribution principle The ...
  • Factory supplied Racine Hydraulic Pumps - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    Factory supplied Racine Hydraulic Pumps - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    1- The 1000/2000/3000 series distributors distribute and proportion incoming oil or grease to bearing points. A typical 100 distributor consists of an inlet section, three to nine valves and an end section. One assembly can serve up to a maximum of 18 lubrication points. 2- The 1000/2000/3000 Series distributors have a sliding discharge piston and built-in outlet check valves. Blocks are offered in three output sizes. The discharge capacity of a block is determined by varying the piston diame...
  • Manufacturer for Rotary Gear Pump Manufacturers - DRD  Series  Oil Electric Lubrication Pump  (GEAR TYPE ) – Jianhe

    Manufacturer for Rotary Gear Pump Manufacturers - DRD Series Oil Electric Lubrication Pump (GEAR TYPE ) – Jianhe

    Performance and characteristics ·The main host machine PLC controls the oil pump motor to operate without intermittent or intermittent operation. Perform circulating cooling lubrication. ·With pressure regulating valve (relieving valve) and pressure maintaining valve to control the working pressure of the lubrication pump Force and prevent oil leakage from the main oil line. ·With dual oil level transmitter, it is convenient for users to monitor the system in the use of oil pump Oil supply s...
  • Factory Price For Helical Gear Pump - M22*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Factory Price For Helical Gear Pump - M22*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Performance and characteristics 1. This pump unit series is specially designed for the pump unit of the electric piston pump. 2, The flow rate is 0.12,0. 16, 0. 20 ml/cyc 3. Nominal Pressure 20 MPa. The highest working pressure: 35MPa. (can adjust) 4.7.Applicable Medium :NLGI NO # 000-2 3.Pump Unit Install drawing  Specification  No. Plunger Diameter Nominal Pressure Pump unit flow rate Connection thread ZS-1 (K-6) Φ 6 20Mpa 0.12 ml/cyc M22*1.5 ZS-2 (K-6) Φ 7 0.16 ml/cyc M22*1.5 ZS...
  • Ordinary Discount Lubricator Oil - M22*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Ordinary Discount Lubricator Oil - M22*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Performance and characteristics 1. This pump unit series is specially designed for the pump unit of the electric piston pump. 2, The flow rate is 0.12,0. 16, 0. 20 ml/cyc 3. Nominal Pressure 20 MPa. The highest working pressure: 35MPa. (can adjust) 4.7.Applicable Medium :NLGI NO # 000-2 3.Pump Unit Install drawing  Specification  No. Plunger Diameter Nominal Pressure Pump unit flow rate Connection thread ZS-1 (K-6) Φ 6 20Mpa 0.12 ml/cyc M22*1.5 ZS-2 (K-6) Φ 7 0.16 ml/cyc M22*1.5 ZS...
  • Bottom price Hydraulic Pumps For Sale - LSG 500CC/800CC  hand grease pump – Jianhe

    Bottom price Hydraulic Pumps For Sale - LSG 500CC/800CC hand grease pump – Jianhe

    Principle: The grease is sent to the oil separator through the reciprocating operation of the handle to distribute the grease to each lubrication point. Advantages:small and light, strong durability. Uses :Widely used in various mechanical equipment. Remarks: This pump has only one M10*1 (6mm tubing) oil outlet. Specification TYPE  OUTPUT  CAPACITY Press Max (MPa)  Apply grease  LSG-05 2CC/CY (2ML/MIN) 500 CC 10MPa 0# 00# 00# LSG-08 2CC/CY (2ML/MIN) 800 CC 10MPa Notice Hand-op...
  • China OEM Oil Gear Pump - XEP20/XEP20A  Hand grease plunger pump – Jianhe

    China OEM Oil Gear Pump - XEP20/XEP20A Hand grease plunger pump – Jianhe

    Performance and characteristics ●Plunger type volumetric pump, transparent resin tank. ●Manual operation, store grease when the handle is pulled out, and drain grease when pushing the handle. ● Small size, easy to install and use. ●XEP20 has no unloading function, and is connected with damped grease distributor and damped grease fittings matching. ●XEP20A has manual unloading function, and pressurized and pressure-relieving quantitative grease Matching kit. ● Use medium: 000#, 00#, or 0# lith...