Oil Pumps Electric

To be able to give you benefit and enlarge our business, we also have inspectors in QC Team and assure you our greatest service and products for Oil Pumps Electric, Gasoline Pump, Rotary Gear Pumps, Pumps, Our merchandise delight in excellent popularity among our buyers. We welcome consumers, business enterprise associations and good friends from all components with the globe to make contact with us and seek out cooperation for mutual rewards. Being supported by an advanced and specialist IT team, we could give technical support on pre-sales & after-sales services for Oil Pumps Electric, If you need to have any of our merchandise, or have other items to be produced, make sure you send us your inquiries, samples or in depth drawings. Meanwhile, aiming to develop into an international enterprise group, we look forward to receiving offers for joint ventures and other cooperative projects.


  • Manufacturer for Oil Pump - Hoses, Tubes And Fittings – Jianhe

    Manufacturer for Oil Pump - Hoses, Tubes And Fittings – Jianhe

    Hydraulic Lubrication Hose(Grease Hose) Characteristics ● High pressure hose with grease is equipped with the screw sleeve (threaded sleeve) and a hose stud (pipe fitting)at its respective line ends and thus ready for connection ● Cost savings, the hose can be taken according to the actual length of use. ● For the installation of the screw sleeve and the hose stud, the mechanic will require no special tools. Easy to disassemble and assemble. Tighten the nut. ●Composite resin hose: This ...
  • Factory Cheap Vacuum Pump Oil - Hoses, Tubes And Fittings – Jianhe

    Factory Cheap Vacuum Pump Oil - Hoses, Tubes And Fittings – Jianhe

    Hydraulic Lubrication Hose(Grease Hose) Characteristics ● High pressure hose with grease is equipped with the screw sleeve (threaded sleeve) and a hose stud (pipe fitting)at its respective line ends and thus ready for connection ● Cost savings, the hose can be taken according to the actual length of use. ● For the installation of the screw sleeve and the hose stud, the mechanic will require no special tools. Easy to disassemble and assemble. Tighten the nut. ●Composite resin hose: This ...
  • Rapid Delivery for Kawasaki Staffa Hydraulic Motors - M20*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Rapid Delivery for Kawasaki Staffa Hydraulic Motors - M20*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Performance and characteristics 1. This pump unit series is specially designed for the pump unit of the electric piston pump. 2. The ow rate is 0. 127ml/cyc 3. When install on pump match a check valve to prevent the discharged grease from owing 4. We can Set an overpressure indicator rod ,The overow grease will return to the grease drum with a Rotary joint. 5. Nominal Pressure 20 MPa. The highest working pressure: 35MPa. (can adjust) 6. Pressure Gauge Y-501,Measure Range 0-40Mpa 7. Applicab...
  • Europe style for Small Hydraulic Pump - HTD Series Electric Lubrication Pump – Jianhe

    Europe style for Small Hydraulic Pump - HTD Series Electric Lubrication Pump – Jianhe

    (2).Technical parameters and performance Motor rated speed Voltage Motor Power Standard pressure Max pressure No-load flow Volumetric efficiency oil viscosity Filtration accuracy Oil tank volume 1350rpm 110V 220V 380V 35W 20W 2.0 MPa 4.5 MPa 100ml/min 160ml/min Ref “P-Q “curve 20~2000cst 90μ 2L 3L 4L   Note: For motor voltage, please refer to the voltage label in the electric lubrication pump. (3).Appearance and installation dimensions (4).Pro...
  • New Arrival China Grease Pumps Manufacturers - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    New Arrival China Grease Pumps Manufacturers - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    1- The 1000/2000/3000 series distributors distribute and proportion incoming oil or grease to bearing points. A typical 100 distributor consists of an inlet section, three to nine valves and an end section. One assembly can serve up to a maximum of 18 lubrication points. 2- The 1000/2000/3000 Series distributors have a sliding discharge piston and built-in outlet check valves. Blocks are offered in three output sizes. The discharge capacity of a block is determined by varying the piston diame...