Oil Pump Gear

Excellent 1st,and Client Supreme is our guideline to deliver the ideal provider to our prospects.Nowadays, we have been seeking our best to become certainly one of the most effective exporters in our discipline to meet shoppers more require for Oil Pump Gear, Hydraulic Pump Units, Dowty Hydraulic Pump, 2 Stage Hydraulic Pumps, We warmly welcome you to establish cooperation and create a bright future together with us. Our development depends on the advanced equipment, excellent talents and continuously strengthened technology forces for Oil Pump Gear, With good quality, reasonable price and sincere service, we enjoy a good reputation. Products are exported to South America, Australia, Southeast Asia and so on. Warmly welcome customers at home and abroad to cooperate with us for the brilliant future.


  • Factory directly supply Diaphragm Pump - Electric Grease Centralized Lubrication Pump – Jianhe

    Factory directly supply Diaphragm Pump - Electric Grease Centralized Lubrication Pump – Jianhe

    Specification Working Pressure: 25MPa; Rated Discharge: 1-3 outlet (5.5 cc/min) ;4-6outlet (2cc/min) for each outlet; Power Supply (Voltage): 12VDC ,24VDC, 220VAC, 380VAC, Motor Input:24VDC/ 50W 12VDC;Motor Input:12VDC/ 50W; 24VDC/ 220VAC/ 380VAC;Motor Input:24VDC/ 50W; Number of Outlet: 1-6 outlet Reservoir Capacity: 2,4,6 litres. Outlet Screw: M10*1(Customised let we know ) Grease Viscosity : NLGI 000#—2# Working Temperature scope : -25℃ – +55℃ l Working environment tem...
  • Newly Arrival Hydraulic Gear Pump Suppliers - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    Newly Arrival Hydraulic Gear Pump Suppliers - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    1- The 1000/2000/3000 series distributors distribute and proportion incoming oil or grease to bearing points. A typical 100 distributor consists of an inlet section, three to nine valves and an end section. One assembly can serve up to a maximum of 18 lubrication points. 2- The 1000/2000/3000 Series distributors have a sliding discharge piston and built-in outlet check valves. Blocks are offered in three output sizes. The discharge capacity of a block is determined by varying the piston diame...
  • 2018 Good Quality Engine Lubricating System - FHA FHB FHC Meter Units (For Resistance System ) – Jianhe

    2018 Good Quality Engine Lubricating System - FHA FHB FHC Meter Units (For Resistance System ) – Jianhe

    Proportional restrictor rod  /Product drawings and dimensions: Draft Model Number Body Mark Code Type L S SPE FLOW RATE(prorate distribution) A Inner thead B Outer Thread OIL VISCOSITY   FHA-00 AJB/DPC 10505-1-00 Meter Unit 28 10 OO 2.5 M8X1 M8X1 20-500cst FHA-0 DPC 10505-1-0 0 5 FHA-1 10505-1-1 1 10 FHA-2 10505-1-2 2 20 FHA-3 10505-1-3 3 40 FHA-4 10505-1-4 4 80 FHA-5 10505-1-5 5 160   Draft Model Number Body Mark Code Type L S SPE FLOW RATE(prorate dis...
  • Reliable Supplier Pump Gears - DCR 1L/ 2L 220V Electromagnetic Automatic Lubricating oil pump  – Jianhe

    Reliable Supplier Pump Gears - DCR 1L/ 2L 220V Electromagnetic Automatic Lubricating oil pump – Jianhe

    Factory good sales with low price !! There have two type : 1 liter 2 liter electromagnetic lubrication pump, 220V, compact and durable, very suitable for the centralized lubrication system of small equipment. Working principle  The automatic lubricating oil pump for CNC machine is a pump that drives the piston to reciprocate and transport oil through the alternating electromagnetic force generated by the electromagnetic field. It has the characteristics of reasonable structure, reliable perfo...
  • China Cheap price Gear Pump Hydraulic - Grease Filter – Jianhe

    China Cheap price Gear Pump Hydraulic - Grease Filter – Jianhe

    Description  Model: EL S Working pressure: 25Mpa Filter fineness: 1 50um ELS is a grease filter , which can effectively remove impurities in grease and ensure the cleaning of oil in lubricating system .lt does not have the blocking alarm function, theadvantage is small volume , easy to install. 1.The grease filter can effectively filter out groceries and foreign objects mixed in the lubricating medium to ensure that the lubricating medium in the entire lubricating system is clean and effectiv...
  • Chinese wholesale Oil Pumps Manufacturers - M22*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Chinese wholesale Oil Pumps Manufacturers - M22*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Performance and characteristics 1. This pump unit series is specially designed for the pump unit of the electric piston pump. 2, The flow rate is 0.12,0. 16, 0. 20 ml/cyc 3. Nominal Pressure 20 MPa. The highest working pressure: 35MPa. (can adjust) 4.7.Applicable Medium :NLGI NO # 000-2 3.Pump Unit Install drawing  Specification  No. Plunger Diameter Nominal Pressure Pump unit flow rate Connection thread ZS-1 (K-6) Φ 6 20Mpa 0.12 ml/cyc M22*1.5 ZS-2 (K-6) Φ 7 0.16 ml/cyc M22*1.5 ZS...
  • Good Quality Gear Pump Manufacturers - Grease Filter – Jianhe

    Good Quality Gear Pump Manufacturers - Grease Filter – Jianhe

    Description  Model: EL S Working pressure: 25Mpa Filter fineness: 1 50um ELS is a grease filter , which can effectively remove impurities in grease and ensure the cleaning of oil in lubricating system .lt does not have the blocking alarm function, theadvantage is small volume , easy to install. 1.The grease filter can effectively filter out groceries and foreign objects mixed in the lubricating medium to ensure that the lubricating medium in the entire lubricating system is clean and effectiv...
  • China wholesale Engine Lubrication - Central Lubrication System Tube  Series – Jianhe

    China wholesale Engine Lubrication - Central Lubrication System Tube Series – Jianhe

      Name: Lubrication Pump Oil Pipe Category: nylon tubing, aluminum tubing, copper and aluminum tubing Model: 4mm, 6mm, 8mm Working Temperature: -30 ℃ -120℃ Length can customized MOQ :1M, can be customized by customers. High-quality and durable: The tubing is made of high-quality materials, high temperature resistance, acid and alkali resistance, corrosion resistance, and pressure resistance. long lasting. The tubing has strong vitality, good flexibility, tensile and explosion-proof resi...
  • Big discounting Hydraulic Motors - Chain lubricating small brush – Jianhe

    Big discounting Hydraulic Motors - Chain lubricating small brush – Jianhe

    Application It can be used for lubricating oil brush, chain oil brush, oiling machine oil brush, machine tool guide rail lubrication nylon brush, escalator oil brush, machine tool brush. Main  charateristics Use a brush to regularly refuel the inner and outer chain plates at the loose side of the chain, 8 hours/Time The quantity and period of oil should be sufficient to prevent the lubricating oil at the chain loop from discoloring. In the high speed range (U greater than 5m / s);In the low...
  • Factory source Hydraulic Pump Exchange - M20*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Factory source Hydraulic Pump Exchange - M20*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Performance and characteristics 1. This pump unit series is specially designed for the pump unit of the electric piston pump. 2. The ow rate is 0. 127ml/cyc 3. When install on pump match a check valve to prevent the discharged grease from owing 4. We can Set an overpressure indicator rod ,The overow grease will return to the grease drum with a Rotary joint. 5. Nominal Pressure 20 MPa. The highest working pressure: 35MPa. (can adjust) 6. Pressure Gauge Y-501,Measure Range 0-40Mpa 7. Applicab...
  • Discount Price Daikin Hydraulic Pumps - Chain lubricating small brush – Jianhe

    Discount Price Daikin Hydraulic Pumps - Chain lubricating small brush – Jianhe

    Application It can be used for lubricating oil brush, chain oil brush, oiling machine oil brush, machine tool guide rail lubrication nylon brush, escalator oil brush, machine tool brush. Main  charateristics Use a brush to regularly refuel the inner and outer chain plates at the loose side of the chain, 8 hours/Time The quantity and period of oil should be sufficient to prevent the lubricating oil at the chain loop from discoloring. In the high speed range (U greater than 5m / s);In the low...
  • High Performance Nippon Oil Pump - DCR 1L/ 2L 220V Electromagnetic Automatic Lubricating oil pump  – Jianhe

    High Performance Nippon Oil Pump - DCR 1L/ 2L 220V Electromagnetic Automatic Lubricating oil pump – Jianhe

    Factory good sales with low price !! There have two type : 1 liter 2 liter electromagnetic lubrication pump, 220V, compact and durable, very suitable for the centralized lubrication system of small equipment. Working principle  The automatic lubricating oil pump for CNC machine is a pump that drives the piston to reciprocate and transport oil through the alternating electromagnetic force generated by the electromagnetic field. It has the characteristics of reasonable structure, reliable perfo...