New Arrival China Grease Pumps Manufacturers - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

"Based on domestic market and expand overseas business" is our improvement strategy for Synthetic Gear Lube, Parker Hydraulic Pump Parts, Hydraulics Pump, We have now a experienced crew for international trade. We are able to solve the problem you meet. We are able to offer the products and solutions you want. You should really feel free of charge to speak to us.
New Arrival China Grease Pumps Manufacturers - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe Detail:

1- The 1000/2000/3000 series distributors distribute and proportion incoming oil or grease to bearing points. A typical 100 distributor consists of an inlet section, three to nine valves and an end section. One assembly can serve up to a maximum of 18 lubrication points.
2- The 1000/2000/3000 Series distributors have a sliding discharge piston and built-in outlet check valves. Blocks are offered in three output sizes. The discharge capacity of a block is determined by varying the piston diameter in the valve block. Valve blocks have two outlets located at each end of the assembly (double outlet blocks). They supply rated discharge outputs from each of the two outlets during one complete valve cycle. 
3- 1000 progressive grease distributor is an advanced design and reasonable structural oil distributor; Can be used in high pressure and wide temperature change conditions. It can be combined with electric and pneumatic pumps to form a single line lubrication system. It is used as a female distributor for various large machine tools and port of equipment , or for large single-line lubrication systems.

4- A standard set of dispensers consists of a “firt chip”✚a piece of “tail chip” ✚ 3-10 piece. It can provides 3-20 lubrication points for lubrication. Double outlet working chip, (after size use T to indicate the double outlet), there are two oil outlets, at the two ends of the working chip;

5- Note that for the double outlet working chip, can not Block any oil outlet, which will affect its normal operation and damage the distributor . Single grease outlet working chip (after the specification value of ,use S to indicate the single grease outlet), there is an oil outlet, which can be any of end of the working piece, and the other end of the outlet oil needs to be blocked.

1000 Metering Devices

Working chips  Standard flow ML/CYC Each chip outlet quantity  
1000-05T 0.08 2
1000-05S 0.16 1
1000-10T 0.16 2
1000-10S 0.32 1
1000-15T 0.24 2
1000-15S 0.48 1

1000 Type The main technical parameters

Max Presssure Mpa  Inlet size  Outlet size  Working chip size (mm) Install hole distance (mm) Install thread Length A  Outlet Pipe dia  (mm)  Working temperature: 
25Mpa  M10*1  /NPT 1/8  M10*1  /NPT 1/8 54*32*14 18 3-M5 A=32+N*14 Standard 6mm  -20°C to +60°C
N Chip number 

Max work pressure:25MPa

Delivery:0.08ml/cyc ~ 0.48ml/cyc
Lubricant viscosity (under standard temperature): oil≥N68,grease:NLGI 000#~2# Work temperature:-20°C~+60°C
Max work frequency (with stem):60cyc/min Max work frequency (without stem):200cyc/min Manifold number:3~8
Tubing: Outlet: Φ6mm length: 0.5~2.5m ,Inlet: Φ6mm length:1.2~3.5m

2000 Metering Devices

Working chips  Standard flow ML/CYC Each chip outlet quantity  
2000-10T 0.16 2
2000-10S 0.32 1
2000-15T 0.24 2
2000-15S 0.48 1
2000-20T 0.32 2
2000-20S 0.64 1
2000-25T 0.40  2
2000-25S 0.80  1
2000-30T 0.48 2
2000-30S 0.96 1
2000-35T 0.56 2
2000-35S 1.12 1

2000 Type The main technical parameters

Max Presssure Mpa  Inlet size  Outlet size  Working chip size (mm) Install hole distance (mm) Install thread Length A  Outlet Pipe dia  (mm)  Working temperature: 
25Mpa  M12*1 .25  M10*1  /NPT 1/8 80*45*19 32 4-M6 A=43+N*20.5 Standard 6mm  -20°C to +60°C
N Chip number 

Max work pressure:25MPa
Delivery:0.16ml/cyc ~ 1.12ml/cyc
Lubricant viscosity (under standard temperature) : oil ≥ N68, grease: NLGI 000#~2# Work temperature: -20°C~+60°C
Max work frequency (with stem): 60cyc/min Max work frequency (without stem): 200cyc/min Manifold number: 3~10
Tubing: Outlet: Φ6mm length: 1.2~3.5m
Inlet: Φ8mm length:1.5~4.5m Manifold Material: carbon steel

3000 Metering Devices

Working chips  Standard flow ML/CYC Each chip outlet quantity  
3000-25T 0.4 2
3000-25S 0.8 1
3000-50T 0.8 2
3000-50S 1.6 1
3000-75T 1.2 2
3000-75S 2.4 1
3000-100T 1.60  2
3000-100S 3.20  1
3000-125T 2 2
3000-125S 4 1
3000-150T 2.4 2
3000-150S 4.8 1

3000 Type The main technical parameters

Max Presssure Mpa  Inlet size  Outlet size  Working chip size (mm) Install hole distance (mm) Install thread Length A  Outlet Pipe dia  (mm)  Working temperature: 
25Mpa  Rp3/8  Rp1/4 128*70*28 47.6 4-M8 A=57.4+N*28.8 Standard 8mm  -20°C to +60°C
N Chip number 

Max work pressure:25MPa
Delivery:0.4ml/cyc ~ 4.8ml/cyc
Lubricant viscosity (under standard temperature) : oil ≥ N68, grease: NLGI 000#~2# Work temperature: -20°C~+60°C
Max work frequency (with stem): 60cyc/min Max work frequency (without stem): 200cyc/min Manifold number: 3~10
Tubing: Outlet: Φ8mm length: 1.5~4.5m
Inlet: Φ10mm length:1.8~5.5m Manifold Material: carbon steel


Product detail pictures:

New Arrival China Grease Pumps Manufacturers - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe detail pictures

New Arrival China Grease Pumps Manufacturers - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe detail pictures

New Arrival China Grease Pumps Manufacturers - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe detail pictures

New Arrival China Grease Pumps Manufacturers - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe detail pictures

New Arrival China Grease Pumps Manufacturers - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe detail pictures

New Arrival China Grease Pumps Manufacturers - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe detail pictures


Related Product Guide:

Well-run equipment, specialist income crew, and better after-sales services; We're also a unified major family, anyone stay with the organization value "unification, determination, tolerance" for New Arrival China Grease Pumps Manufacturers - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe , The product will supply to all over the world, such as: Tanzania, Algeria, Slovakia, We will supply much better products with diversified designs and professional services. We sincerely welcome friends from over the world to visit our company and cooperate with us on the basis of long-term and mutual benefits.
  • The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
    5 Stars By Athena from South Africa - 2017.08.28 16:02
    The company can keep up with the changes in this industry market, product updates fast and the price is cheap, this is our second cooperation, it's good.
    5 Stars By Elizabeth from kazan - 2017.08.28 16:02
    Write your message here and send it to us