Miniature Gear Pumps

Sticking towards the principle of "Super High-quality, Satisfactory service" ,We've been striving to become a superb business partner of you for Miniature Gear Pumps, Hydraulic Pump Kawasaki, External Oil Pump, Centrifugal Oil Pumps, Let's cooperate hand in hand to jointly make a beautiful future. We sincerely welcome you to visit our company or contact us for cooperation! The corporation upholds the philosophy of "Be No.1 in high quality, be rooted on credit rating and trustworthiness for growth", will continue to serve outdated and new consumers from home and overseas whole-heatedly for Miniature Gear Pumps, We adopted technique and quality system management, based on "customer orientated, reputation first, mutual benefit, develop with joint efforts", welcome friends to communicate and cooperate from all over the world.


  • Best-Selling Oilgear Pvg - Hoses, Tubes And Fittings – Jianhe

    Best-Selling Oilgear Pvg - Hoses, Tubes And Fittings – Jianhe

    Hydraulic Lubrication Hose(Grease Hose) Characteristics ● High pressure hose with grease is equipped with the screw sleeve (threaded sleeve) and a hose stud (pipe fitting)at its respective line ends and thus ready for connection ● Cost savings, the hose can be taken according to the actual length of use. ● For the installation of the screw sleeve and the hose stud, the mechanic will require no special tools. Easy to disassemble and assemble. Tighten the nut. ●Composite resin hose: This ...
  • Factory selling Lubricant Oils - LSG 500CC/800CC  hand grease pump – Jianhe

    Factory selling Lubricant Oils - LSG 500CC/800CC hand grease pump – Jianhe

    Principle: The grease is sent to the oil separator through the reciprocating operation of the handle to distribute the grease to each lubrication point. Advantages:small and light, strong durability. Uses :Widely used in various mechanical equipment. Remarks: This pump has only one M10*1 (6mm tubing) oil outlet. Specification TYPE  OUTPUT  CAPACITY Press Max (MPa)  Apply grease  LSG-05 2CC/CY (2ML/MIN) 500 CC 10MPa 0# 00# 00# LSG-08 2CC/CY (2ML/MIN) 800 CC 10MPa Notice Hand-op...
  • Professional China Grease Lubrication Pump - M20*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Professional China Grease Lubrication Pump - M20*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Performance and characteristics 1. This pump unit series is specially designed for the pump unit of the electric piston pump. 2. The ow rate is 0. 127ml/cyc 3. When install on pump match a check valve to prevent the discharged grease from owing 4. We can Set an overpressure indicator rod ,The overow grease will return to the grease drum with a Rotary joint. 5. Nominal Pressure 20 MPa. The highest working pressure: 35MPa. (can adjust) 6. Pressure Gauge Y-501,Measure Range 0-40Mpa 7. Applicab...
  • Good Quality Stainless Steel Gear Pumps - DR Series Electric Oil/Grease Lubrication Pump  (GEAR TYPE) – Jianhe

    Good Quality Stainless Steel Gear Pumps - DR Series Electric Oil/Grease Lubrication Pump (GEAR TYPE) – Jianhe

    Performance and features The rated working pressure is 2.0Mpa/4.0Mpa, and there is a relief valve to prevent the oil pump from overloading. It has unloading function: After stopping work, can remove the oil pressure in the main pipe of the system and it is mainly used in the Quantitative type (pressure or unload pressure type ) concentrated oil centralized lubrication pump. With liquid level switch (normally open AC220V/2A DC36V/2A), used to detect the main oil pipeline disconnection and lo...
  • Chinese wholesale Thick Oil Pump - PV/PVS Resistance Distributor( For Resistance System ) – Jianhe

    Chinese wholesale Thick Oil Pump - PV/PVS Resistance Distributor( For Resistance System ) – Jianhe

    1.The distributor is divided into two categories: single split and Double-way split. Used in resistive lubrication systems. 2.The Φ4 /Φ6 main oil pipeline through it to divert. Inlet /Outlet threads are M8X1/M10x1 which is matched by GN-4/GN-6 oil pipe connector and GB-4/GB-6 Oil Pile Sleeve 3.The resistive FHA metering element delivers the oil directly through it to the lubrication point. 4.Connect the equipment directly is FHB metering element. Model to choose    Model No. Oil Out...
  • Competitive Price for Lubricant Manufacturers - M22*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Competitive Price for Lubricant Manufacturers - M22*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Performance and characteristics 1. This pump unit series is specially designed for the pump unit of the electric piston pump. 2, The flow rate is 0.12,0. 16, 0. 20 ml/cyc 3. Nominal Pressure 20 MPa. The highest working pressure: 35MPa. (can adjust) 4.7.Applicable Medium :NLGI NO # 000-2 3.Pump Unit Install drawing  Specification  No. Plunger Diameter Nominal Pressure Pump unit flow rate Connection thread ZS-1 (K-6) Φ 6 20Mpa 0.12 ml/cyc M22*1.5 ZS-2 (K-6) Φ 7 0.16 ml/cyc M22*1.5 ZS...
  • High definition Auto Greasing Systems - U-Block Grease Distributors – Jianhe

    High definition Auto Greasing Systems - U-Block Grease Distributors – Jianhe

    Type  Oil outlet  U-6 4 U-6 6 U-8 8 U-10 10 U-12 12 Specification Inlet  Outlet  Discharge capacity (ml/cyc) Operating pressure (Mpa) Install hole distance intall thread  Size of U Block  Rp 1/4(6mm ) Rp1/8 (4mm ) 0.3 15Mpa for grease  45*54 2-M6 59*68*51.5 59*68*66.5 Technical Operating pressure : 3Mpa for oil or 15Mpa for grease Discharge : 0.3ml/cyc Lubricant viscosity (under standard temperature): oil≥N68, Grease : NLGI 000#~1#. Ambient temperature : -10...
  • Special Design for Lubrication Equipments - LSG 500CC/800CC  hand grease pump – Jianhe

    Special Design for Lubrication Equipments - LSG 500CC/800CC hand grease pump – Jianhe

    Principle: The grease is sent to the oil separator through the reciprocating operation of the handle to distribute the grease to each lubrication point. Advantages:small and light, strong durability. Uses :Widely used in various mechanical equipment. Remarks: This pump has only one M10*1 (6mm tubing) oil outlet. Specification TYPE  OUTPUT  CAPACITY Press Max (MPa)  Apply grease  LSG-05 2CC/CY (2ML/MIN) 500 CC 10MPa 0# 00# 00# LSG-08 2CC/CY (2ML/MIN) 800 CC 10MPa Notice Hand-op...
  • Factory wholesale 2l Grease Lubrication Pump For Crushers - Tube Clamp – Jianhe

    Factory wholesale 2l Grease Lubrication Pump For Crushers - Tube Clamp – Jianhe

    C lubricating oil pipe clamp, iron pipe clamp, nylon tube/trachea tube clamp, tubing compression sheet, multiple pipe clamps Product name: metal double pipe clamp (as follow ) Product material: polypropylene nylon, aluminum Type  Type  Tube outdia  Clamp pipe number  PCB-6-1 Ø6 1 tube PCB-6-2 2 tube PCB-6-3 3 tube PCB-6-4 4 tube PCB-8-1 Ø8 1 tube PCB-8-2 2 tube PCB-8-3 3 tube PCB-8-4 4 tube PCB-10-1 Ø10 1 tube PCB-10-2 2 tube PCB-10-3 3 tube PCB-10-4 4 tube P...
  • professional factory for Industrial Lubricating Oils - HP-5  Small volume hand plastic piston small portable manual pump – Jianhe

    professional factory for Industrial Lubricating Oils - HP-5 Small volume hand plastic piston small portable manual pump – Jianhe

    Specification Model No. Product code  Standard flow  Volume  Standard Working Pressure (Mpa) Lubrication point   Using oil viscosity Outlet  Handle  HP-5 10502/L 2-7   Ml/cyc (can adjusted) 0.5L 0.3Mpa with length of 15m, height of 3m and with 15 lubricating points. 32-250cst      Left /Middle /Right  10502/M M8*1 (For 4mm pipe ) 10502/R   The working principle : Hand pump handle pull down for oi absorption process . Handle reset for discharge process. Suitable for a day oi...