Hoses, Tubes And Fittings

Short Description:

All necessary tubing, hoses, fittings and fastening material are available to meet your system requirements.
Tubes are available in several sizes and materials ranging from steel, stainless steel, and copper to plastic (PA). To save your time when installing your own systems, plastic tubes are even available pre-filled with grease.
Fittings are also available in several sizes, materials and series (light to heavy). For easy installation, we have special Quicklinc push-in type fittings that can be used with plastic tubes.


Product Detail

Product Tags

Hydraulic Lubrication Hose(Grease Hose)
Characteristics
● High pressure hose with grease is equipped with the screw sleeve (threaded sleeve) and a hose stud (pipe fitting)at its respective line ends and thus ready for connection
● Cost savings, the hose can be taken according to the actual length of use.
● For the installation of the screw sleeve and the hose stud, the mechanic will require no special tools. Easy to disassemble and assemble.
Tighten the nut.
●Composite resin hose: This kind of hose is made of inner tube (PA11), reinforcement (High Pressure Synthetic Fiber), and cover made of three layers of High Flexibility polyurethane.).It is Light weight, Flexibility, and the inner tube is very smooth. With a few loss of pressure, the hose resistance of the medium flowing is small, and it also owns a fine performance of Anti-chemical and impulse.
●Applicable to Automobile, Engineering, Machinery, Lathe, Agriculture, Machine, Mining, Spurting the oil paint, avigation & Space flight, Cooling and other Hydraulic Control System.
In case of occasion, spring sheath protection can be added.
●Applicable temperature range is -20C – 80C.

Hydraulic Lubrication Hose(Grease Hose) Size For Choose

SPECIFICATION FOR POLYURETHANE TUBE(Lubrication Hose)
Product features Max temperature at permanment use +80℃
Min temperature -20℃
Slight length deviation at operating pressure lessthen +-3%
Heutral reading the mast at mospheric influences
Good proportion between inside and outside diametre
low weight
         
  Size  O.D(mm) I.D(mm) W.P working pressure (MPa)
Size  8.8×4.2 8.8 4.2 21
8.6×4.2 8.6 4.2
11×6 11 6
6×3 6 3

Hydraulic Lubrication Hose(Grease Hose) To Assemble With Fittings

屏幕快照 2020-09-02 下午9.52.52

ee1

KA Fitting  KA-4  KA-6  KA-8  KA-10
The pin size for  oil Pipe ( d1) Φ4 Φ6 Φ8 Φ10
Hose to fit (d2) 8.8×4.2 8.6×4.2 8.6×4.2 11×6
    8.8×4.2 8.8×4.2  
      11×6  
F  mm  According customer’s need 
W.P working pressure (MPa) Working pressure 21MPa
Maximum bear 25MPa ,                                                                                                         Maximum burst pressure 84MPa, 
KB Fitting  / KB-6  KB-8  KB-10
The pin size ( d1) / Φ6 Φ8 Φ10
Hose to fit  (d2) / 8.6×4.2 8.6×4.2 11×6
    8.8×4.2 8.8×4.2  
      11×6  
F  mm  According customer’s need 
W.P working pressure (MPa) Working pressure 21MPa
Maximum bear 25MPa ,                                                                                                         Maximum burst pressure 84MPa, 

ww2-300x300


  • Previous:
  • Next:

  • Write your message here and send it to us