Grease Pump

We have advanced equipment. Our products are exported to the USA, the UK and so on, enjoying a good reputation among customers for Grease Pump, Hydraulic Manual Pump, Hydraulic Pump Manufacturers, Micro Pump, Our company is dedicated to providing customers with high and stable quality products at competitive price, making every customer satisfied with our products and services. We aim to find out quality disfigurement from the production and supply the best service to domestic and overseas customers wholeheartedly for Grease Pump, Our company follows laws and international practice. We promise to be responsible for friends, customers and all partners. We would like to establish a long-term relationship and friendship with every customer from all over the world on the basis of mutual benefits. We warmly welcome all old and new customers to visit our company to negotiate business.


  • Y-6/Y-8 Plunger type Hand Oil lubrication pump

    Y-6/Y-8 Plunger type Hand Oil lubrication pump

    Plunger type oil storage pump, using aluminum alloy die-casting barrel, manual operation
    Easy to use, with oil mark on the outside, you can always observe the oil level dynamics. and also
    Oil can be supplied directly to the lubrication point and can also be used with HT or dispensers.
    Oil Viscosity :20-150cst
    Working principle

    When the handle is pulled by pulling, the plunger is pushed to discharge the oil stored in the cylinder; the plunger absorbs the oil under the action of the spring force.

  • XEP20/XEP20A  Hand grease plunger pump

    XEP20/XEP20A Hand grease plunger pump

    LSG Type Grease Hand Pump is a Plunger type lubrication pump ,can directly lubricate grease
    also can be distributed to each lubrication point by proportion or quantitatively by distributor.
    Suitable for lubrication of small and medium sized mechanical equipment,Such as machine tool ,
    spinning machine,Plastic machinery ,engineering machinery ,wood working machinery ,packing machinery and forging machinery etc.

  • LSG 500CC/800CC  hand grease pump

    LSG 500CC/800CC hand grease pump

    LSG Type Grease Hand Pump is a Plunger type lubrication pump ,can directly lubricate grease
    also can be distributed to each lubrication point by proportion or quantitatively by distributor.
    Suitable for lubrication of small and medium sized mechanical equipment,Such as machine tool ,
    spinning machine,Plastic machinery ,engineering machinery ,wood working machinery ,packing machinery and forging machinery etc.

  • HP-5  Small volume hand plastic piston small portable manual pump

    HP-5 Small volume hand plastic piston small portable manual pump

    HP-5 is a hand pump with a small piston structure (oil tank volume: 0.5L). The piston hand pump can accurate discharge oil and easy to adjust. A check valve is provided to prevent the discharged oil from flowing backwards. The pump is equipped with three pressure rod methods, left hand (L) pressure rod, right hand (R) pressure rod and middle (M) pressure rod. The oil outlet diameter is 4MM. Easy to install. Save energy and protect the environment clean. Matching distributor: PV series coupling body. Supporting measuring parts: FHA.FHB series Using oil viscosity: 32-250cst Note: in order to avoid pump Parts are damaged. HP-5 type can press the handle only one time when oiling, after the oil supply is finished (the handle is self-recovering), then can be taken the next action .

  • Factory Free sample Gear Oil Leak - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    Factory Free sample Gear Oil Leak - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    1- The 1000/2000/3000 series distributors distribute and proportion incoming oil or grease to bearing points. A typical 100 distributor consists of an inlet section, three to nine valves and an end section. One assembly can serve up to a maximum of 18 lubrication points. 2- The 1000/2000/3000 Series distributors have a sliding discharge piston and built-in outlet check valves. Blocks are offered in three output sizes. The discharge capacity of a block is determined by varying the piston diame...
  • Original Factory Oil Lubricated Bearings - HP-5  Small volume hand plastic piston small portable manual pump – Jianhe

    Original Factory Oil Lubricated Bearings - HP-5 Small volume hand plastic piston small portable manual pump – Jianhe

    Specification Model No. Product code  Standard flow  Volume  Standard Working Pressure (Mpa) Lubrication point   Using oil viscosity Outlet  Handle  HP-5 10502/L 2-7   Ml/cyc (can adjusted) 0.5L 0.3Mpa with length of 15m, height of 3m and with 15 lubricating points. 32-250cst      Left /Middle /Right  10502/M M8*1 (For 4mm pipe ) 10502/R   The working principle : Hand pump handle pull down for oi absorption process . Handle reset for discharge process. Suitable for a day oi...
  • Factory wholesale Hydraulic Pump Coupling - M20*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Factory wholesale Hydraulic Pump Coupling - M20*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Performance and characteristics 1. This pump unit series is specially designed for the pump unit of the electric piston pump. 2. The ow rate is 0. 127ml/cyc 3. When install on pump match a check valve to prevent the discharged grease from owing 4. We can Set an overpressure indicator rod ,The overow grease will return to the grease drum with a Rotary joint. 5. Nominal Pressure 20 MPa. The highest working pressure: 35MPa. (can adjust) 6. Pressure Gauge Y-501,Measure Range 0-40Mpa 7. Applicab...
  • Factory wholesale 2l Grease Lubrication Pump For Crushers - Tube Clamp – Jianhe

    Factory wholesale 2l Grease Lubrication Pump For Crushers - Tube Clamp – Jianhe

    C lubricating oil pipe clamp, iron pipe clamp, nylon tube/trachea tube clamp, tubing compression sheet, multiple pipe clamps Product name: metal double pipe clamp (as follow ) Product material: polypropylene nylon, aluminum Type  Type  Tube outdia  Clamp pipe number  PCB-6-1 Ø6 1 tube PCB-6-2 2 tube PCB-6-3 3 tube PCB-6-4 4 tube PCB-8-1 Ø8 1 tube PCB-8-2 2 tube PCB-8-3 3 tube PCB-8-4 4 tube PCB-10-1 Ø10 1 tube PCB-10-2 2 tube PCB-10-3 3 tube PCB-10-4 4 tube P...