Gear Pump Filler

Our personnel are always in the spirit of "continuous improvement and excellence", and together with the top-quality good quality solutions, favorable selling price and superior after-sales providers, we try to acquire each customer's rely on for Gear Pump Filler, Hydraulic Pump Types, Electric Lubrication Pump, Komatsu Hydraulic Pumps, Our concept would be to assist presenting the confidence of each prospective buyers while using the offering of our most honest service, as well as right merchandise. All we do is usually connected with our tenet " Consumer initial, Rely on 1st, devoting around the food stuff packaging and environmental safety for Gear Pump Filler, we are fully determined to control the whole supply chain so as to provide quality products at competitive price in a timely manner. We are keeping up with the advanced techniques, growing through creating more values for our clients and society.


  • High Performance Lubrication Components - Hoses, Tubes And Fittings – Jianhe

    High Performance Lubrication Components - Hoses, Tubes And Fittings – Jianhe

    Hydraulic Lubrication Hose(Grease Hose) Characteristics ● High pressure hose with grease is equipped with the screw sleeve (threaded sleeve) and a hose stud (pipe fitting)at its respective line ends and thus ready for connection ● Cost savings, the hose can be taken according to the actual length of use. ● For the installation of the screw sleeve and the hose stud, the mechanic will require no special tools. Easy to disassemble and assemble. Tighten the nut. ●Composite resin hose: This ...
  • Best Price for Oil Gear Company - RH Oil Pressure Volumetric Distributor – Jianhe

    Best Price for Oil Gear Company - RH Oil Pressure Volumetric Distributor – Jianhe

    The Specifications And Technical Parameters Model No. Outlet  Oil Standard Working Pressure (Mpa) *Discharge Oil Size Mark Outsize 1 2 3 4 L A  Oil flow (ml/time) /Mark  RH-3200 2way  32-1300cst 1.0-2.0 0.1/10 0.2/20 0.3/30 0.4/40 39 49 RH-3300 3way  54 64 RH-3400 4way  72 82 RH-3500 5way  84 94 •The volumetric distributor is a pressure-reducing action type,the pressure oil delivered by the lubrication pump pushes the piston in the metering part, and the oil is stored ...
  • Low MOQ for Oil Systems - T86 Grease/Oil Pressure Quantitative Dispenser – Jianhe

    Low MOQ for Oil Systems - T86 Grease/Oil Pressure Quantitative Dispenser – Jianhe

    Model No. Number of Outlet Working Pressure Apply oil Standard Flow can choose (ml/cyc) Mark d (d1) Mounting hole A B H H1 D L T8615* 1 2.0 Mpa 32-1300cst A(0.03)           B(0.06)              C(0.10)                  D(0.16) 3 6 10 16 M10X1 / / / / / / / T8616* 2 3-Φ5.5 36 13.5 58 18 Φ16 46 T8617* 3 2-Φ5.5 17 15.5 63 T8619* 4 34 80 T8618* 5 51 97 T8621* 1 A(0.10)           B(0.20)              C(0.40)                  D(0.60) 10 20 40 60 M12X1.25 / / / / / / / T8622* ...
  • 18 Years Factory Centrifugal Oil Pumps - Hoses, Tubes And Fittings – Jianhe

    18 Years Factory Centrifugal Oil Pumps - Hoses, Tubes And Fittings – Jianhe

    Hydraulic Lubrication Hose(Grease Hose) Characteristics ● High pressure hose with grease is equipped with the screw sleeve (threaded sleeve) and a hose stud (pipe fitting)at its respective line ends and thus ready for connection ● Cost savings, the hose can be taken according to the actual length of use. ● For the installation of the screw sleeve and the hose stud, the mechanic will require no special tools. Easy to disassemble and assemble. Tighten the nut. ●Composite resin hose: This ...
  • Free sample for Hydraulic Pump Couplers - Y-6/Y-8 Plunger type Hand Oil lubrication pump – Jianhe

    Free sample for Hydraulic Pump Couplers - Y-6/Y-8 Plunger type Hand Oil lubrication pump – Jianhe

    Specification Model  Outlet Oil Pipe    diamter  Max Pressure Discharge per stroke (ml/cyc) Lubrication Points Tank Capacity Viscosity Outlet number Y-6 4MM/6MM 1.5Mpa   (15kgf/cm2) 8 30 350 (ML) 20-150cst Can one side or two side  Y-8 4MM/6MM 500 (ML) Application  widely used for lubrication of small and medium sized mechanical equipment pressure machine, milling machine,CNC machine tools, machining centers, production lines, machine tools, forging, textiles, plastics, wood...
  • China New Product Hydraulic Pump Suppliers - M20*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    China New Product Hydraulic Pump Suppliers - M20*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Performance and characteristics 1. This pump unit series is specially designed for the pump unit of the electric piston pump. 2. The ow rate is 0. 127ml/cyc 3. When install on pump match a check valve to prevent the discharged grease from owing 4. We can Set an overpressure indicator rod ,The overow grease will return to the grease drum with a Rotary joint. 5. Nominal Pressure 20 MPa. The highest working pressure: 35MPa. (can adjust) 6. Pressure Gauge Y-501,Measure Range 0-40Mpa 7. Applicab...