Force Hydraulic Pumps

Our commission is always to provide our customers and clientele with best quality and aggressive portable digital products for Force Hydraulic Pumps, Racine Hydraulic Pumps, Yuken Hydraulic Pumps, Hydrolic Pumps, Warmly welcome to cooperate and develop with us! we are going to continue to provide product or service with high quality and competitive rate. Dependable good quality and very good credit score standing are our principles, which will help us at a top-ranking position. Adhering towards the tenet of "quality initial, shopper supreme" for Force Hydraulic Pumps, To meet the requirements of individual customers for each bit more perfect service and stable quality products. We warmly welcome customers around the world to visit us, with our multi-faceted cooperation, and jointly develop new markets, create a brilliant future!


  • China OEM Oil Gear Pump - XEP20/XEP20A  Hand grease plunger pump – Jianhe

    China OEM Oil Gear Pump - XEP20/XEP20A Hand grease plunger pump – Jianhe

    Performance and characteristics ●Plunger type volumetric pump, transparent resin tank. ●Manual operation, store grease when the handle is pulled out, and drain grease when pushing the handle. ● Small size, easy to install and use. ●XEP20 has no unloading function, and is connected with damped grease distributor and damped grease fittings matching. ●XEP20A has manual unloading function, and pressurized and pressure-relieving quantitative grease Matching kit. ● Use medium: 000#, 00#, or 0# lith...
  • High definition Bearing Lubrication - DRD  Series  Oil Electric Lubrication Pump  (GEAR TYPE ) – Jianhe

    High definition Bearing Lubrication - DRD Series Oil Electric Lubrication Pump (GEAR TYPE ) – Jianhe

    Performance and characteristics ·The main host machine PLC controls the oil pump motor to operate without intermittent or intermittent operation. Perform circulating cooling lubrication. ·With pressure regulating valve (relieving valve) and pressure maintaining valve to control the working pressure of the lubrication pump Force and prevent oil leakage from the main oil line. ·With dual oil level transmitter, it is convenient for users to monitor the system in the use of oil pump Oil supply s...
  • Chinese Professional Auto Pump - MO MG Pressurized Quantitative Oil/Grease Type (Volumetric Type)						 								 – Jianhe

    Chinese Professional Auto Pump - MO MG Pressurized Quantitative Oil/Grease Type (Volumetric Type) – Jianhe

    Deacribtion  -The pressurized quantitative type (volumetric type) measuring piece is a direct pressure type.Depending on the type of connecting thread, -The pressure oil delivered by the lubrication pump pushes the piston built in the metering member to force the discharge of the quantitative oil ; -When the lubrication pump stops working, the measuring piece is reset by the spring force, the metering and storing the quantitative oil. -The oil discharge is accurate. The metering parts are onl...
  • Top Quality Casappa Hydraulic Pumps - M20*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Top Quality Casappa Hydraulic Pumps - M20*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Performance and characteristics 1. This pump unit series is specially designed for the pump unit of the electric piston pump. 2. The ow rate is 0. 127ml/cyc 3. When install on pump match a check valve to prevent the discharged grease from owing 4. We can Set an overpressure indicator rod ,The overow grease will return to the grease drum with a Rotary joint. 5. Nominal Pressure 20 MPa. The highest working pressure: 35MPa. (can adjust) 6. Pressure Gauge Y-501,Measure Range 0-40Mpa 7. Applicab...
  • OEM/ODM Manufacturer Cessna Hydraulic Motor - T86 Grease/Oil Pressure Quantitative Dispenser – Jianhe

    OEM/ODM Manufacturer Cessna Hydraulic Motor - T86 Grease/Oil Pressure Quantitative Dispenser – Jianhe

    Model No. Number of Outlet Working Pressure Apply oil Standard Flow can choose (ml/cyc) Mark d (d1) Mounting hole A B H H1 D L T8615* 1 2.0 Mpa 32-1300cst A(0.03)           B(0.06)              C(0.10)                  D(0.16) 3 6 10 16 M10X1 / / / / / / / T8616* 2 3-Φ5.5 36 13.5 58 18 Φ16 46 T8617* 3 2-Φ5.5 17 15.5 63 T8619* 4 34 80 T8618* 5 51 97 T8621* 1 A(0.10)           B(0.20)              C(0.40)                  D(0.60) 10 20 40 60 M12X1.25 / / / / / / / T8622* ...
  • Factory selling Lincoln Industrial - HP-5  Small volume hand plastic piston small portable manual pump – Jianhe

    Factory selling Lincoln Industrial - HP-5 Small volume hand plastic piston small portable manual pump – Jianhe

    Specification Model No. Product code  Standard flow  Volume  Standard Working Pressure (Mpa) Lubrication point   Using oil viscosity Outlet  Handle  HP-5 10502/L 2-7   Ml/cyc (can adjusted) 0.5L 0.3Mpa with length of 15m, height of 3m and with 15 lubricating points. 32-250cst      Left /Middle /Right  10502/M M8*1 (For 4mm pipe ) 10502/R   The working principle : Hand pump handle pull down for oi absorption process . Handle reset for discharge process. Suitable for a day oi...
  • Manufacturer of Automated Lubrication Systems - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    Manufacturer of Automated Lubrication Systems - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    1- The 1000/2000/3000 series distributors distribute and proportion incoming oil or grease to bearing points. A typical 100 distributor consists of an inlet section, three to nine valves and an end section. One assembly can serve up to a maximum of 18 lubrication points. 2- The 1000/2000/3000 Series distributors have a sliding discharge piston and built-in outlet check valves. Blocks are offered in three output sizes. The discharge capacity of a block is determined by varying the piston diame...
  • Factory wholesale Skf Lubrication - PV/PVS Resistance Distributor( For Resistance System ) – Jianhe

    Factory wholesale Skf Lubrication - PV/PVS Resistance Distributor( For Resistance System ) – Jianhe

    1.The distributor is divided into two categories: single split and Double-way split. Used in resistive lubrication systems. 2.The Φ4 /Φ6 main oil pipeline through it to divert. Inlet /Outlet threads are M8X1/M10x1 which is matched by GN-4/GN-6 oil pipe connector and GB-4/GB-6 Oil Pile Sleeve 3.The resistive FHA metering element delivers the oil directly through it to the lubrication point. 4.Connect the equipment directly is FHB metering element. Model to choose    Model No. Oil Out...
  • New Arrival China Hydraulic Pump Units - T86 Grease/Oil Pressure Quantitative Dispenser – Jianhe

    New Arrival China Hydraulic Pump Units - T86 Grease/Oil Pressure Quantitative Dispenser – Jianhe

    Model No. Number of Outlet Working Pressure Apply oil Standard Flow can choose (ml/cyc) Mark d (d1) Mounting hole A B H H1 D L T8615* 1 2.0 Mpa 32-1300cst A(0.03)           B(0.06)              C(0.10)                  D(0.16) 3 6 10 16 M10X1 / / / / / / / T8616* 2 3-Φ5.5 36 13.5 58 18 Φ16 46 T8617* 3 2-Φ5.5 17 15.5 63 T8619* 4 34 80 T8618* 5 51 97 T8621* 1 A(0.10)           B(0.20)              C(0.40)                  D(0.60) 10 20 40 60 M12X1.25 / / / / / / / T8622* ...
  • Low MOQ for Oilgear Hydraulic Pump - DCR 1L/ 2L 220V Electromagnetic Automatic Lubricating oil pump  – Jianhe

    Low MOQ for Oilgear Hydraulic Pump - DCR 1L/ 2L 220V Electromagnetic Automatic Lubricating oil pump – Jianhe

    Factory good sales with low price !! There have two type : 1 liter 2 liter electromagnetic lubrication pump, 220V, compact and durable, very suitable for the centralized lubrication system of small equipment. Working principle  The automatic lubricating oil pump for CNC machine is a pump that drives the piston to reciprocate and transport oil through the alternating electromagnetic force generated by the electromagnetic field. It has the characteristics of reasonable structure, reliable perfo...
  • Good Quality Gear Pump Manufacturers - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    Good Quality Gear Pump Manufacturers - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    1- The 1000/2000/3000 series distributors distribute and proportion incoming oil or grease to bearing points. A typical 100 distributor consists of an inlet section, three to nine valves and an end section. One assembly can serve up to a maximum of 18 lubrication points. 2- The 1000/2000/3000 Series distributors have a sliding discharge piston and built-in outlet check valves. Blocks are offered in three output sizes. The discharge capacity of a block is determined by varying the piston diame...
  • Discountable price Bosch Gear Pumps - M22*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Discountable price Bosch Gear Pumps - M22*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Performance and characteristics 1. This pump unit series is specially designed for the pump unit of the electric piston pump. 2, The flow rate is 0.12,0. 16, 0. 20 ml/cyc 3. Nominal Pressure 20 MPa. The highest working pressure: 35MPa. (can adjust) 4.7.Applicable Medium :NLGI NO # 000-2 3.Pump Unit Install drawing  Specification  No. Plunger Diameter Nominal Pressure Pump unit flow rate Connection thread ZS-1 (K-6) Φ 6 20Mpa 0.12 ml/cyc M22*1.5 ZS-2 (K-6) Φ 7 0.16 ml/cyc M22*1.5 ZS...