Factory Free sample Gear Oil Leak - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We will make just about every exertion for being excellent and perfect, and speed up our actions for standing during the rank of worldwide top-grade and high-tech enterprises for Oilgear Piston Pumps, Dayton Hydraulic Pump, Webster Hydraulic Pumps, We welcome buyers all around the word to make contact with us for foreseeable future small business associations. Our products and solutions are the most beneficial. Once Selected, Perfect Forever!
Factory Free sample Gear Oil Leak - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe Detail:

1- The 1000/2000/3000 series distributors distribute and proportion incoming oil or grease to bearing points. A typical 100 distributor consists of an inlet section, three to nine valves and an end section. One assembly can serve up to a maximum of 18 lubrication points.
2- The 1000/2000/3000 Series distributors have a sliding discharge piston and built-in outlet check valves. Blocks are offered in three output sizes. The discharge capacity of a block is determined by varying the piston diameter in the valve block. Valve blocks have two outlets located at each end of the assembly (double outlet blocks). They supply rated discharge outputs from each of the two outlets during one complete valve cycle. 
3- 1000 progressive grease distributor is an advanced design and reasonable structural oil distributor; Can be used in high pressure and wide temperature change conditions. It can be combined with electric and pneumatic pumps to form a single line lubrication system. It is used as a female distributor for various large machine tools and port of equipment , or for large single-line lubrication systems.

4- A standard set of dispensers consists of a “firt chip”✚a piece of “tail chip” ✚ 3-10 piece. It can provides 3-20 lubrication points for lubrication. Double outlet working chip, (after size use T to indicate the double outlet), there are two oil outlets, at the two ends of the working chip;

5- Note that for the double outlet working chip, can not Block any oil outlet, which will affect its normal operation and damage the distributor . Single grease outlet working chip (after the specification value of ,use S to indicate the single grease outlet), there is an oil outlet, which can be any of end of the working piece, and the other end of the outlet oil needs to be blocked.

1000 Metering Devices

Working chips  Standard flow ML/CYC Each chip outlet quantity  
1000-05T 0.08 2
1000-05S 0.16 1
1000-10T 0.16 2
1000-10S 0.32 1
1000-15T 0.24 2
1000-15S 0.48 1

1000 Type The main technical parameters

Max Presssure Mpa  Inlet size  Outlet size  Working chip size (mm) Install hole distance (mm) Install thread Length A  Outlet Pipe dia  (mm)  Working temperature: 
25Mpa  M10*1  /NPT 1/8  M10*1  /NPT 1/8 54*32*14 18 3-M5 A=32+N*14 Standard 6mm  -20°C to +60°C
N Chip number 

Max work pressure:25MPa

Delivery:0.08ml/cyc ~ 0.48ml/cyc
Lubricant viscosity (under standard temperature): oil≥N68,grease:NLGI 000#~2# Work temperature:-20°C~+60°C
Max work frequency (with stem):60cyc/min Max work frequency (without stem):200cyc/min Manifold number:3~8
Tubing: Outlet: Φ6mm length: 0.5~2.5m ,Inlet: Φ6mm length:1.2~3.5m

2000 Metering Devices

Working chips  Standard flow ML/CYC Each chip outlet quantity  
2000-10T 0.16 2
2000-10S 0.32 1
2000-15T 0.24 2
2000-15S 0.48 1
2000-20T 0.32 2
2000-20S 0.64 1
2000-25T 0.40  2
2000-25S 0.80  1
2000-30T 0.48 2
2000-30S 0.96 1
2000-35T 0.56 2
2000-35S 1.12 1

2000 Type The main technical parameters

Max Presssure Mpa  Inlet size  Outlet size  Working chip size (mm) Install hole distance (mm) Install thread Length A  Outlet Pipe dia  (mm)  Working temperature: 
25Mpa  M12*1 .25  M10*1  /NPT 1/8 80*45*19 32 4-M6 A=43+N*20.5 Standard 6mm  -20°C to +60°C
N Chip number 

Max work pressure:25MPa
Delivery:0.16ml/cyc ~ 1.12ml/cyc
Lubricant viscosity (under standard temperature) : oil ≥ N68, grease: NLGI 000#~2# Work temperature: -20°C~+60°C
Max work frequency (with stem): 60cyc/min Max work frequency (without stem): 200cyc/min Manifold number: 3~10
Tubing: Outlet: Φ6mm length: 1.2~3.5m
Inlet: Φ8mm length:1.5~4.5m Manifold Material: carbon steel

3000 Metering Devices

Working chips  Standard flow ML/CYC Each chip outlet quantity  
3000-25T 0.4 2
3000-25S 0.8 1
3000-50T 0.8 2
3000-50S 1.6 1
3000-75T 1.2 2
3000-75S 2.4 1
3000-100T 1.60  2
3000-100S 3.20  1
3000-125T 2 2
3000-125S 4 1
3000-150T 2.4 2
3000-150S 4.8 1

3000 Type The main technical parameters

Max Presssure Mpa  Inlet size  Outlet size  Working chip size (mm) Install hole distance (mm) Install thread Length A  Outlet Pipe dia  (mm)  Working temperature: 
25Mpa  Rp3/8  Rp1/4 128*70*28 47.6 4-M8 A=57.4+N*28.8 Standard 8mm  -20°C to +60°C
N Chip number 

Max work pressure:25MPa
Delivery:0.4ml/cyc ~ 4.8ml/cyc
Lubricant viscosity (under standard temperature) : oil ≥ N68, grease: NLGI 000#~2# Work temperature: -20°C~+60°C
Max work frequency (with stem): 60cyc/min Max work frequency (without stem): 200cyc/min Manifold number: 3~10
Tubing: Outlet: Φ8mm length: 1.5~4.5m
Inlet: Φ10mm length:1.8~5.5m Manifold Material: carbon steel


Product detail pictures:

Factory Free sample Gear Oil Leak - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe detail pictures

Factory Free sample Gear Oil Leak - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe detail pictures

Factory Free sample Gear Oil Leak - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe detail pictures

Factory Free sample Gear Oil Leak - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe detail pictures

Factory Free sample Gear Oil Leak - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe detail pictures

Factory Free sample Gear Oil Leak - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe detail pictures


Related Product Guide:

Using a complete scientific high quality management program, superior high quality and superior faith, we acquire great reputation and occupied this industry for Factory Free sample Gear Oil Leak - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe , The product will supply to all over the world, such as: Zimbabwe, Mombasa, Uruguay, our qualify products have good reputation from the world as its most competive price and our most advantage of after-sale service to the clients.we hope we can provide a safe, environmental products and super service to our clients from all of the world and establish strategic partnership with them by our professional standards and unremitting efforts.
  • We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
    5 Stars By Daisy from Frankfurt - 2017.01.28 18:53
    The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
    5 Stars By Henry stokeld from French - 2017.05.02 18:28
    Write your message here and send it to us