Electrical Oil Pump

We always think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and the living for Electrical Oil Pump, Automotive Oil Pumps, Barnes Hydraulic Pumps, Komatsu Hydraulic Pump, The continual availability of high grade products in combination with our excellent pre- and after-sales service ensures strong competitiveness in an increasingly globalized market. Quality First,and Customer Supreme is our guideline to provide the best service to our customers.Nowadays, we are trying our best to become one of the best exporters in our field to meet customers more need for Electrical Oil Pump, Our products have been obtained more and more recognition from foreign clients, and established long term and cooperative relationship with them. We`ll provide the best service for every customer and sincerely welcome friends to work with us and establish the mutual benefit together.


  • Factory source Piston Pump - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    Factory source Piston Pump - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    1- The 1000/2000/3000 series distributors distribute and proportion incoming oil or grease to bearing points. A typical 100 distributor consists of an inlet section, three to nine valves and an end section. One assembly can serve up to a maximum of 18 lubrication points. 2- The 1000/2000/3000 Series distributors have a sliding discharge piston and built-in outlet check valves. Blocks are offered in three output sizes. The discharge capacity of a block is determined by varying the piston diame...
  • factory customized Hydraulic Motor Seals - HTD Series Electric Lubrication Pump – Jianhe

    factory customized Hydraulic Motor Seals - HTD Series Electric Lubrication Pump – Jianhe

    (2).Technical parameters and performance Motor rated speed Voltage Motor Power Standard pressure Max pressure No-load flow Volumetric efficiency oil viscosity Filtration accuracy Oil tank volume 1350rpm 110V 220V 380V 35W 20W 2.0 MPa 4.5 MPa 100ml/min 160ml/min Ref “P-Q “curve 20~2000cst 90μ 2L 3L 4L   Note: For motor voltage, please refer to the voltage label in the electric lubrication pump. (3).Appearance and installation dimensions (4).Pro...
  • 100% Original Hydraulic Motors And Pumps - M22*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    100% Original Hydraulic Motors And Pumps - M22*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Performance and characteristics 1. This pump unit series is specially designed for the pump unit of the electric piston pump. 2, The flow rate is 0.12,0. 16, 0. 20 ml/cyc 3. Nominal Pressure 20 MPa. The highest working pressure: 35MPa. (can adjust) 4.7.Applicable Medium :NLGI NO # 000-2 3.Pump Unit Install drawing  Specification  No. Plunger Diameter Nominal Pressure Pump unit flow rate Connection thread ZS-1 (K-6) Φ 6 20Mpa 0.12 ml/cyc M22*1.5 ZS-2 (K-6) Φ 7 0.16 ml/cyc M22*1.5 ZS...
  • Popular Design for Oilgear Piston Pumps - T86 Grease/Oil Pressure Quantitative Dispenser – Jianhe

    Popular Design for Oilgear Piston Pumps - T86 Grease/Oil Pressure Quantitative Dispenser – Jianhe

    Model No. Number of Outlet Working Pressure Apply oil Standard Flow can choose (ml/cyc) Mark d (d1) Mounting hole A B H H1 D L T8615* 1 2.0 Mpa 32-1300cst A(0.03)           B(0.06)              C(0.10)                  D(0.16) 3 6 10 16 M10X1 / / / / / / / T8616* 2 3-Φ5.5 36 13.5 58 18 Φ16 46 T8617* 3 2-Φ5.5 17 15.5 63 T8619* 4 34 80 T8618* 5 51 97 T8621* 1 A(0.10)           B(0.20)              C(0.40)                  D(0.60) 10 20 40 60 M12X1.25 / / / / / / / T8622* ...
  • Best Price for Crude Oil Pump - FHA FHB FHC Meter Units (For Resistance System ) – Jianhe

    Best Price for Crude Oil Pump - FHA FHB FHC Meter Units (For Resistance System ) – Jianhe

    Proportional restrictor rod  /Product drawings and dimensions: Draft Model Number Body Mark Code Type L S SPE FLOW RATE(prorate distribution) A Inner thead B Outer Thread OIL VISCOSITY   FHA-00 AJB/DPC 10505-1-00 Meter Unit 28 10 OO 2.5 M8X1 M8X1 20-500cst FHA-0 DPC 10505-1-0 0 5 FHA-1 10505-1-1 1 10 FHA-2 10505-1-2 2 20 FHA-3 10505-1-3 3 40 FHA-4 10505-1-4 4 80 FHA-5 10505-1-5 5 160   Draft Model Number Body Mark Code Type L S SPE FLOW RATE(prorate dis...
  • Manufactur standard Gear Oil Pumps - M20*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Manufactur standard Gear Oil Pumps - M20*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Performance and characteristics 1. This pump unit series is specially designed for the pump unit of the electric piston pump. 2. The ow rate is 0. 127ml/cyc 3. When install on pump match a check valve to prevent the discharged grease from owing 4. We can Set an overpressure indicator rod ,The overow grease will return to the grease drum with a Rotary joint. 5. Nominal Pressure 20 MPa. The highest working pressure: 35MPa. (can adjust) 6. Pressure Gauge Y-501,Measure Range 0-40Mpa 7. Applicab...
  • Best-Selling Oilgear Pvg - DCR 1L/ 2L 220V Electromagnetic Automatic Lubricating oil pump  – Jianhe

    Best-Selling Oilgear Pvg - DCR 1L/ 2L 220V Electromagnetic Automatic Lubricating oil pump – Jianhe

    Factory good sales with low price !! There have two type : 1 liter 2 liter electromagnetic lubrication pump, 220V, compact and durable, very suitable for the centralized lubrication system of small equipment. Working principle  The automatic lubricating oil pump for CNC machine is a pump that drives the piston to reciprocate and transport oil through the alternating electromagnetic force generated by the electromagnetic field. It has the characteristics of reasonable structure, reliable perfo...
  • China Manufacturer for Oil Lube System - Hoses, Tubes And Fittings – Jianhe

    China Manufacturer for Oil Lube System - Hoses, Tubes And Fittings – Jianhe

    Hydraulic Lubrication Hose(Grease Hose) Characteristics ● High pressure hose with grease is equipped with the screw sleeve (threaded sleeve) and a hose stud (pipe fitting)at its respective line ends and thus ready for connection ● Cost savings, the hose can be taken according to the actual length of use. ● For the installation of the screw sleeve and the hose stud, the mechanic will require no special tools. Easy to disassemble and assemble. Tighten the nut. ●Composite resin hose: This ...
  • 2018 New Style Air Grease Guns - LSG 500CC/800CC  hand grease pump – Jianhe

    2018 New Style Air Grease Guns - LSG 500CC/800CC hand grease pump – Jianhe

    Principle: The grease is sent to the oil separator through the reciprocating operation of the handle to distribute the grease to each lubrication point. Advantages:small and light, strong durability. Uses :Widely used in various mechanical equipment. Remarks: This pump has only one M10*1 (6mm tubing) oil outlet. Specification TYPE  OUTPUT  CAPACITY Press Max (MPa)  Apply grease  LSG-05 2CC/CY (2ML/MIN) 500 CC 10MPa 0# 00# 00# LSG-08 2CC/CY (2ML/MIN) 800 CC 10MPa Notice Hand-op...
  • Discount wholesale Lubrication - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    Discount wholesale Lubrication - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    1- The 1000/2000/3000 series distributors distribute and proportion incoming oil or grease to bearing points. A typical 100 distributor consists of an inlet section, three to nine valves and an end section. One assembly can serve up to a maximum of 18 lubrication points. 2- The 1000/2000/3000 Series distributors have a sliding discharge piston and built-in outlet check valves. Blocks are offered in three output sizes. The discharge capacity of a block is determined by varying the piston diame...
  • Good Wholesale Vendors Air Grease Pump - Y-6/Y-8 Plunger type Hand Oil lubrication pump – Jianhe

    Good Wholesale Vendors Air Grease Pump - Y-6/Y-8 Plunger type Hand Oil lubrication pump – Jianhe

    Specification Model  Outlet Oil Pipe    diamter  Max Pressure Discharge per stroke (ml/cyc) Lubrication Points Tank Capacity Viscosity Outlet number Y-6 4MM/6MM 1.5Mpa   (15kgf/cm2) 8 30 350 (ML) 20-150cst Can one side or two side  Y-8 4MM/6MM 500 (ML) Application  widely used for lubrication of small and medium sized mechanical equipment pressure machine, milling machine,CNC machine tools, machining centers, production lines, machine tools, forging, textiles, plastics, wood...
  • Hot sale Lubricators - Grease Filter – Jianhe

    Hot sale Lubricators - Grease Filter – Jianhe

    Description  Model: EL S Working pressure: 25Mpa Filter fineness: 1 50um ELS is a grease filter , which can effectively remove impurities in grease and ensure the cleaning of oil in lubricating system .lt does not have the blocking alarm function, theadvantage is small volume , easy to install. 1.The grease filter can effectively filter out groceries and foreign objects mixed in the lubricating medium to ensure that the lubricating medium in the entire lubricating system is clean and effectiv...