Electric Fluid Pump

Our concentrate on is always to consolidate and enhance the excellent and service of present solutions, in the meantime regularly develop new products to meet distinctive customers' demands for Electric Fluid Pump, Salami Gear Pumps, Cessna Hydraulic Pump Parts, Internal Gear Pump Design, We have been wanting ahead to setting up cooperative associations along with you. Make sure you contact us for more data. Adhering into the basic principle of "quality, assistance, effectiveness and growth", we have attained trusts and praises from domestic and worldwide client for Electric Fluid Pump, Our tenet is "integrity first, quality best". We have confidence in providing you with excellent service and ideal products. We sincerely hope we can establish win-win business cooperation with you in the future!


  • Manufactur standard Cheap Hydraulic Pumps - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    Manufactur standard Cheap Hydraulic Pumps - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    1- The 1000/2000/3000 series distributors distribute and proportion incoming oil or grease to bearing points. A typical 100 distributor consists of an inlet section, three to nine valves and an end section. One assembly can serve up to a maximum of 18 lubrication points. 2- The 1000/2000/3000 Series distributors have a sliding discharge piston and built-in outlet check valves. Blocks are offered in three output sizes. The discharge capacity of a block is determined by varying the piston diame...
  • Hot sale Hydraulic Pump Power - DR Series Electric Oil/Grease Lubrication Pump  (GEAR TYPE) – Jianhe

    Hot sale Hydraulic Pump Power - DR Series Electric Oil/Grease Lubrication Pump (GEAR TYPE) – Jianhe

    Performance and features The rated working pressure is 2.0Mpa/4.0Mpa, and there is a relief valve to prevent the oil pump from overloading. It has unloading function: After stopping work, can remove the oil pressure in the main pipe of the system and it is mainly used in the Quantitative type (pressure or unload pressure type ) concentrated oil centralized lubrication pump. With liquid level switch (normally open AC220V/2A DC36V/2A), used to detect the main oil pipeline disconnection and lo...
  • Discountable price Daikin Hydraulic Piston Pump - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    Discountable price Daikin Hydraulic Piston Pump - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    1- The 1000/2000/3000 series distributors distribute and proportion incoming oil or grease to bearing points. A typical 100 distributor consists of an inlet section, three to nine valves and an end section. One assembly can serve up to a maximum of 18 lubrication points. 2- The 1000/2000/3000 Series distributors have a sliding discharge piston and built-in outlet check valves. Blocks are offered in three output sizes. The discharge capacity of a block is determined by varying the piston diame...
  • New Arrival China Types Of Hydraulic Pumps - DR Series Electric Oil/Grease Lubrication Pump  (GEAR TYPE) – Jianhe

    New Arrival China Types Of Hydraulic Pumps - DR Series Electric Oil/Grease Lubrication Pump (GEAR TYPE) – Jianhe

    Performance and features The rated working pressure is 2.0Mpa/4.0Mpa, and there is a relief valve to prevent the oil pump from overloading. It has unloading function: After stopping work, can remove the oil pressure in the main pipe of the system and it is mainly used in the Quantitative type (pressure or unload pressure type ) concentrated oil centralized lubrication pump. With liquid level switch (normally open AC220V/2A DC36V/2A), used to detect the main oil pipeline disconnection and lo...
  • Top Quality Casappa Hydraulic Pumps - M22*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Top Quality Casappa Hydraulic Pumps - M22*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Performance and characteristics 1. This pump unit series is specially designed for the pump unit of the electric piston pump. 2, The flow rate is 0.12,0. 16, 0. 20 ml/cyc 3. Nominal Pressure 20 MPa. The highest working pressure: 35MPa. (can adjust) 4.7.Applicable Medium :NLGI NO # 000-2 3.Pump Unit Install drawing  Specification  No. Plunger Diameter Nominal Pressure Pump unit flow rate Connection thread ZS-1 (K-6) Φ 6 20Mpa 0.12 ml/cyc M22*1.5 ZS-2 (K-6) Φ 7 0.16 ml/cyc M22*1.5 ZS...
  • High reputation Double Gear Pump - Chain lubricating small brush – Jianhe

    High reputation Double Gear Pump - Chain lubricating small brush – Jianhe

    Application It can be used for lubricating oil brush, chain oil brush, oiling machine oil brush, machine tool guide rail lubrication nylon brush, escalator oil brush, machine tool brush. Main  charateristics Use a brush to regularly refuel the inner and outer chain plates at the loose side of the chain, 8 hours/Time The quantity and period of oil should be sufficient to prevent the lubricating oil at the chain loop from discoloring. In the high speed range (U greater than 5m / s);In the low...
  • Factory directly supply Diaphragm Pump - Electric Grease Centralized Lubrication Pump – Jianhe

    Factory directly supply Diaphragm Pump - Electric Grease Centralized Lubrication Pump – Jianhe

    Specification Working Pressure: 25MPa; Rated Discharge: 1-3 outlet (5.5 cc/min) ;4-6outlet (2cc/min) for each outlet; Power Supply (Voltage): 12VDC ,24VDC, 220VAC, 380VAC, Motor Input:24VDC/ 50W 12VDC;Motor Input:12VDC/ 50W; 24VDC/ 220VAC/ 380VAC;Motor Input:24VDC/ 50W; Number of Outlet: 1-6 outlet Reservoir Capacity: 2,4,6 litres. Outlet Screw: M10*1(Customised let we know ) Grease Viscosity : NLGI 000#—2# Working Temperature scope : -25℃ – +55℃ l Working environment tem...
  • professional factory for Gear Lubrication - HT  Type Adjustable Oil Distributor ( For Resistance System ) – Jianhe

    professional factory for Gear Lubrication - HT Type Adjustable Oil Distributor ( For Resistance System ) – Jianhe

    Adjustable needle distributor can be adjusted according to the different flow of each channel. The above model standard size is inlet M10*1 (connected to 6MM pipe), and the outlet is M8*1 (connected to 4MM pipe), and the opposite side of the main pipe port is blocked. Two type : Normal type or fast fix type .Applicable to the thin oil and butter lubrication system, the oil can be adjusted arbitrarily, and each oil outlet is provided with a check valve to prevent the oil from being discharged....
  • One of Hottest for Pump Grease - MO MG Pressurized Quantitative Oil/Grease Type (Volumetric Type)						 								 – Jianhe

    One of Hottest for Pump Grease - MO MG Pressurized Quantitative Oil/Grease Type (Volumetric Type) – Jianhe

    Deacribtion  -The pressurized quantitative type (volumetric type) measuring piece is a direct pressure type.Depending on the type of connecting thread, -The pressure oil delivered by the lubrication pump pushes the piston built in the metering member to force the discharge of the quantitative oil ; -When the lubrication pump stops working, the measuring piece is reset by the spring force, the metering and storing the quantitative oil. -The oil discharge is accurate. The metering parts are onl...
  • Factory Outlets Lower Unit Gear Lube Pump - MVB Progressive Systems Metering Devices   – Jianhe

    Factory Outlets Lower Unit Gear Lube Pump - MVB Progressive Systems Metering Devices – Jianhe

    The MVB series progressive distributor is designed for small-size progressive lubrication systems. They are a cost efficient solution for supplying multiple lubrication points with relatively small volumes of oil and grease. The MVB series can be used with machine tools, processing machinery, presses, textile, printing and packaging machinery. The MVB is also suitable for mobile applications, including off-road equipment. 1 Oil Outlet  MVB Standard Flow : 0.17ml 2 Distribution principle The ...
  • Factory selling Lincoln Industrial - DR Series Electric Oil/Grease Lubrication Pump  (GEAR TYPE) – Jianhe

    Factory selling Lincoln Industrial - DR Series Electric Oil/Grease Lubrication Pump (GEAR TYPE) – Jianhe

    Performance and features The rated working pressure is 2.0Mpa/4.0Mpa, and there is a relief valve to prevent the oil pump from overloading. It has unloading function: After stopping work, can remove the oil pressure in the main pipe of the system and it is mainly used in the Quantitative type (pressure or unload pressure type ) concentrated oil centralized lubrication pump. With liquid level switch (normally open AC220V/2A DC36V/2A), used to detect the main oil pipeline disconnection and lo...