The MVB series progressive distributor is designed for small-size progressive lubrication systems. They are a cost efficient solution for supplying multiple lubrication points with relatively small volumes of oil and grease. The MVB series can be used with machine tools, processing machinery, presses, textile, printing and packaging machinery. The MVB is also suitable for mobile applications, including off-road equipment.
1 Oil Outlet
MVB Standard Flow : 0.17ml
2 Distribution principle
The plunger sleeve is connected through the oil hole to establish pressure. As long as there is pressure to allow the lubricant to enter the oil mouth, the distributor will run continuously in a progressive manner and fill with a constant displacement.
Once the supplied pressure lubricant stops, all of the plungers in the dispenser will also stop moving. Therefore, by operating a specific indicator to observe the movement of an oil discharge plunger, the operation of the entire distributor can be monitored. In the event of a blockage, an alarm can be issued.
The plunger which closest to the oil inlet ,discharges the lubricant oil first from the farthest oil outlet , and the other plungers in the valve body discharge the quantitative lubricant through the next oil outlet.
Operating pressure max: 30MPa
Max. differential pressure between 2 outlets: 7MPa
Discharge per outlet::0.17ml3/cyc
Ambient temperature:-20°C to +80°C
Grease lubricants:NLGI 000 # to 2#; Oil ISO VG 68 to 1500 at operating temperature
|MODEL NO .||Discharge per outlet||Max Working Pressure||Inlet thread||Outlet for pipe dia||L (mm)||Max. differential pressure between 2 outlets||Install hole distance(mm)||Working Temprate||Grease lubricants|
|MVB-6.||Standard Flow 0.17ml/cyc||30Mpa||Rp1/8||Φ6||60||7Mpa||20||From -20℃To 80℃||(NLGI)#000,#00,#0,#1,#2 ;Oil ISO VG 68 to 1500|
–Progressive oil supply, modular structure for easy replacement
–Up to 300 BAR working pressure, long life, suitable for high temperature, low temperature, corrosion and other environments
–Easy to monitor, configurable cycle indicator rod
–Carbon steel or stainless steel optional
–Use media: (NLGI)#000,#00,#0,#1,#2
–The various outlets are related to each other, and the system supervision is very simple.
–Number of outlets Max 22 pcs
• No rubber seals
• Single block design
• Internal combining of outlets • Exact lubricant metering
• Easy to monitor
• Fault-free replacement:
should a metering device be exchanged, connection and output or adjustment errors are avoided
• High operating pressure