China wholesale Central Lubrication System Manufacturer - MO MG Pressurized Quantitative Oil/Grease Type (Volumetric Type) – Jianhe

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our aim would be to fulfill our shoppers by offering golden company, very good value and good quality for Magnetic Gear Pump, Lube Pumps, Oil Gear Pump Company, Winning customers' trust is the gold key to our success! If you are interested in our products, please feel free to visit our web site or contact us.
China wholesale Central Lubrication System Manufacturer - MO MG Pressurized Quantitative Oil/Grease Type (Volumetric Type) – Jianhe Detail:

Deacribtion  -The pressurized quantitative type (volumetric type) measuring piece is a direct pressure type.Depending on the type of connecting thread, -The pressure oil delivered by the lubrication pump pushes the piston built in the metering member to force the discharge of the quantitative oil ; -When the lubrication pump stops working, the measuring piece is reset by the spring force, the metering and storing the quantitative oil. -The oil discharge is accurate. The metering parts are only drained once in a single oil supply cycle, and the distance between the two in the lubrication system is far, near, high, and low. The horizontal or vertical installation has no effect on the displacement of the measuring parts. -Forced to drain oil, sensitive action. Two seals are used to prevent the discharged oil from flowing back. The measuring piece and the oil row are in a split structure, and the corresponding measuring piece can be arbitrarily selected according to the demand of each lubricating point, and can be used freely in combination with the RH series and the T86 ,ZLFG series oil row.

Inlet Thread Spec Outlet Thread /Outlet Pipe Dia (mm) Model  Nominal Displacement Mark Highest pressure (Mpa ) Action pressure (Mpa) Reset Pressure (Mpa) L(MM)
R1/8  M8X1,Φ4mm MO-3 0.03 3 8 6 0.3 44.5
MO-5 0.05 5
MO-10 0.1 10
MO-20 0.2 20 53.5
MO-30 0.3 30
MO-40 0.4 40
MO-50 0.5 50 65

 

Inlet Thread Spec Outlet Thread /Outlet Pipe Dia  Model  Nominal Displacement Mark Highest pressure (Mpa ) Action pressure (Mpa) Reset Pressure (Mpa) L(MM)
M8x1 M8X1,Φ4mm MO-3 0.03 3 8 6 0.3 44.5
MO-5 0.05 5
MO-10 0.1 10
MO-20 0.2 20 53.5
MO-30 0.3 30
MO-40 0.4 40
MO-50 0.5 50 65

The lubricant delivered under pressure from the oil pump enters the oil inlet hole A of the metering piece and pushes the umbrella valve B in the metering piece to start moving upwards Working principle When the umbrella valve B seals the center hole D of the core rod, the pressure oil overcomes the force of the spring C in the metering piece to gradually push the piston E up, and at the same time, the oil originally stored in the upper cavity H is gradually discharged outward. The pressure oil gradually pushes the piston E to the end of the upper cavity. At this time, the last oil stored in the upper cavity H is also drained at the same time, and the system pressure rises and gradually reaches the rated working pressure. When the oil pump stops supplying oil (the motor stops working), its solenoid valve stops working synchronously and opens the oil return channel. Make the pressure oil in the main oil pipe return to the oil storage cylinder through the pressure relief valve ( pressure relief). At this time, the system pressure drops, the metering piston E starts to recover under the force of the spring C, and the umbrella valve B is due to the pressure difference and move down to seal the metering piece oil inlet A. Under the dual action of the spring C and the partial vacuum generated by the movement of the piston, the oil stored in the lower cavity G is replenished to the upper cavity H through the central hole D of the core rod, that is, the next oil supply is also ready.


Product detail pictures:

China wholesale Central Lubrication System Manufacturer - MO MG Pressurized Quantitative Oil/Grease Type (Volumetric Type)						 								 – Jianhe detail pictures

China wholesale Central Lubrication System Manufacturer - MO MG Pressurized Quantitative Oil/Grease Type (Volumetric Type)						 								 – Jianhe detail pictures

China wholesale Central Lubrication System Manufacturer - MO MG Pressurized Quantitative Oil/Grease Type (Volumetric Type)						 								 – Jianhe detail pictures

China wholesale Central Lubrication System Manufacturer - MO MG Pressurized Quantitative Oil/Grease Type (Volumetric Type)						 								 – Jianhe detail pictures

China wholesale Central Lubrication System Manufacturer - MO MG Pressurized Quantitative Oil/Grease Type (Volumetric Type)						 								 – Jianhe detail pictures


Related Product Guide:

"Sincerity, Innovation, Rigorousness, and Efficiency" may be the persistent conception of our organization to the long-term to build together with shoppers for mutual reciprocity and mutual advantage for China wholesale Central Lubrication System Manufacturer - MO MG Pressurized Quantitative Oil/Grease Type (Volumetric Type) – Jianhe , The product will supply to all over the world, such as: Sacramento, Ukraine, Argentina, If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
  • Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
    5 Stars By Erin from Mali - 2018.06.28 19:27
    It is not easy to find such a professional and responsible provider in today's time. Hope that we can maintain long-term cooperation.
    5 Stars By Martina from Malaysia - 2018.12.10 19:03
    Write your message here and send it to us