Centralised Lubrication

We emphasize development and introduce new products into the market every year for Centralised Lubrication, Hydraulic Pump Suppliers, Hydrualic Pumps, Showa Lube Pump, We are always looking forward to forming successful business relationships with new clients around the world. We can constantly satisfy our respected customers with our good high quality, good price tag and good support due to we have been additional specialist and extra hard-working and do it in cost-effective way for Centralised Lubrication, we are fully determined to control the whole supply chain so as to provide quality products at competitive price in a timely manner. We are keeping up with the advanced techniques, growing through creating more values for our clients and society.


  • Wholesale Grease Lubricator - Chain lubricating small brush – Jianhe

    Wholesale Grease Lubricator - Chain lubricating small brush – Jianhe

    Application It can be used for lubricating oil brush, chain oil brush, oiling machine oil brush, machine tool guide rail lubrication nylon brush, escalator oil brush, machine tool brush. Main  charateristics Use a brush to regularly refuel the inner and outer chain plates at the loose side of the chain, 8 hours/Time The quantity and period of oil should be sufficient to prevent the lubricating oil at the chain loop from discoloring. In the high speed range (U greater than 5m / s);In the low...
  • Wholesale Dealers of Lincoln Lubrication System - HP-5  Small volume hand plastic piston small portable manual pump – Jianhe

    Wholesale Dealers of Lincoln Lubrication System - HP-5 Small volume hand plastic piston small portable manual pump – Jianhe

    Specification Model No. Product code  Standard flow  Volume  Standard Working Pressure (Mpa) Lubrication point   Using oil viscosity Outlet  Handle  HP-5 10502/L 2-7   Ml/cyc (can adjusted) 0.5L 0.3Mpa with length of 15m, height of 3m and with 15 lubricating points. 32-250cst      Left /Middle /Right  10502/M M8*1 (For 4mm pipe ) 10502/R   The working principle : Hand pump handle pull down for oi absorption process . Handle reset for discharge process. Suitable for a day oi...
  • Good quality Gerotor Pump - Y-6/Y-8 Plunger type Hand Oil lubrication pump – Jianhe

    Good quality Gerotor Pump - Y-6/Y-8 Plunger type Hand Oil lubrication pump – Jianhe

    Specification Model  Outlet Oil Pipe    diamter  Max Pressure Discharge per stroke (ml/cyc) Lubrication Points Tank Capacity Viscosity Outlet number Y-6 4MM/6MM 1.5Mpa   (15kgf/cm2) 8 30 350 (ML) 20-150cst Can one side or two side  Y-8 4MM/6MM 500 (ML) Application  widely used for lubrication of small and medium sized mechanical equipment pressure machine, milling machine,CNC machine tools, machining centers, production lines, machine tools, forging, textiles, plastics, wood...
  • Leading Manufacturer for Hydraulic Pump Gear - Electric Grease Centralized Lubrication Pump – Jianhe

    Leading Manufacturer for Hydraulic Pump Gear - Electric Grease Centralized Lubrication Pump – Jianhe

    Specification Working Pressure: 25MPa; Rated Discharge: 1-3 outlet (5.5 cc/min) ;4-6outlet (2cc/min) for each outlet; Power Supply (Voltage): 12VDC ,24VDC, 220VAC, 380VAC, Motor Input:24VDC/ 50W 12VDC;Motor Input:12VDC/ 50W; 24VDC/ 220VAC/ 380VAC;Motor Input:24VDC/ 50W; Number of Outlet: 1-6 outlet Reservoir Capacity: 2,4,6 litres. Outlet Screw: M10*1(Customised let we know ) Grease Viscosity : NLGI 000#—2# Working Temperature scope : -25℃ – +55℃ l Working environment tem...
  • China Manufacturer for Oil Lube System - Hoses, Tubes And Fittings – Jianhe

    China Manufacturer for Oil Lube System - Hoses, Tubes And Fittings – Jianhe

    Hydraulic Lubrication Hose(Grease Hose) Characteristics ● High pressure hose with grease is equipped with the screw sleeve (threaded sleeve) and a hose stud (pipe fitting)at its respective line ends and thus ready for connection ● Cost savings, the hose can be taken according to the actual length of use. ● For the installation of the screw sleeve and the hose stud, the mechanic will require no special tools. Easy to disassemble and assemble. Tighten the nut. ●Composite resin hose: This ...
  • Factory wholesale Oil Suction Pump - Europe style for Mercruiser Gear Lube Pump - U-Block Grease Distributors – Jianhe – Jianhe

    Factory wholesale Oil Suction Pump - Europe style for Mercruiser Gear Lube Pump - U-Block Grease Distributors – Jianhe – Jianhe

    Type  Oil outlet  U-6 4 U-6 6 U-8 8 U-10 10 U-12 12 Specification Inlet  Outlet  Discharge capacity (ml/cyc) Operating pressure (Mpa) Install hole distance intall thread  Size of U Block  Rp 1/4(6mm ) Rp1/8 (4mm ) 0.3 15Mpa for grease  45*54 2-M6 59*68*51.5 59*68*66.5 Technical Operating pressure : 3Mpa for oil or 15Mpa for grease Discharge : 0.3ml/cyc Lubricant viscosity (under standard temperature): oil≥N68, Grease : NLGI 000#~1#. Ambient temperature : -10...
  • Discount wholesale Lubricate Oil - Europe style for Mercruiser Gear Lube Pump - U-Block Grease Distributors – Jianhe – Jianhe

    Discount wholesale Lubricate Oil - Europe style for Mercruiser Gear Lube Pump - U-Block Grease Distributors – Jianhe – Jianhe

    Type  Oil outlet  U-6 4 U-6 6 U-8 8 U-10 10 U-12 12 Specification Inlet  Outlet  Discharge capacity (ml/cyc) Operating pressure (Mpa) Install hole distance intall thread  Size of U Block  Rp 1/4(6mm ) Rp1/8 (4mm ) 0.3 15Mpa for grease  45*54 2-M6 59*68*51.5 59*68*66.5 Technical Operating pressure : 3Mpa for oil or 15Mpa for grease Discharge : 0.3ml/cyc Lubricant viscosity (under standard temperature): oil≥N68, Grease : NLGI 000#~1#. Ambient temperature : -10...
  • High reputation Double Gear Pump - LSG 500CC/800CC  hand grease pump – Jianhe

    High reputation Double Gear Pump - LSG 500CC/800CC hand grease pump – Jianhe

    Principle: The grease is sent to the oil separator through the reciprocating operation of the handle to distribute the grease to each lubrication point. Advantages:small and light, strong durability. Uses :Widely used in various mechanical equipment. Remarks: This pump has only one M10*1 (6mm tubing) oil outlet. Specification TYPE  OUTPUT  CAPACITY Press Max (MPa)  Apply grease  LSG-05 2CC/CY (2ML/MIN) 500 CC 10MPa 0# 00# 00# LSG-08 2CC/CY (2ML/MIN) 800 CC 10MPa Notice Hand-op...
  • Wholesale Price Oil Scavenging Pump - DCR 1L/ 2L 220V Electromagnetic Automatic Lubricating oil pump  – Jianhe

    Wholesale Price Oil Scavenging Pump - DCR 1L/ 2L 220V Electromagnetic Automatic Lubricating oil pump – Jianhe

    Factory good sales with low price !! There have two type : 1 liter 2 liter electromagnetic lubrication pump, 220V, compact and durable, very suitable for the centralized lubrication system of small equipment. Working principle  The automatic lubricating oil pump for CNC machine is a pump that drives the piston to reciprocate and transport oil through the alternating electromagnetic force generated by the electromagnetic field. It has the characteristics of reasonable structure, reliable perfo...