Casappa Gear Pump

We've been commitment to offer the competitive rate ,outstanding merchandise good quality, too as fast delivery for Casappa Gear Pump, Oil Gear Pump Parts, Dry Sump Oil Pump, Trochoid Oil Pump, We're prepared to present you with the most effective ideas over the designs of the orders in a qualified way for those who need. While in the meantime, we continue to keep on producing new technologies and building new designs so as to help make you ahead from the line of this small business. The corporation keeps to the operation concept "scientific management, superior quality and performance primacy, consumer supreme for Casappa Gear Pump, Our company always concentrate on the development of the international market. We now have a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.


  • Wholesale Price China Oil Change Pump - M22*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Wholesale Price China Oil Change Pump - M22*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Performance and characteristics 1. This pump unit series is specially designed for the pump unit of the electric piston pump. 2, The flow rate is 0.12,0. 16, 0. 20 ml/cyc 3. Nominal Pressure 20 MPa. The highest working pressure: 35MPa. (can adjust) 4.7.Applicable Medium :NLGI NO # 000-2 3.Pump Unit Install drawing  Specification  No. Plunger Diameter Nominal Pressure Pump unit flow rate Connection thread ZS-1 (K-6) Φ 6 20Mpa 0.12 ml/cyc M22*1.5 ZS-2 (K-6) Φ 7 0.16 ml/cyc M22*1.5 ZS...
  • OEM Customized Food Grade Grease - T86 Grease/Oil Pressure Quantitative Dispenser – Jianhe

    OEM Customized Food Grade Grease - T86 Grease/Oil Pressure Quantitative Dispenser – Jianhe

    Model No. Number of Outlet Working Pressure Apply oil Standard Flow can choose (ml/cyc) Mark d (d1) Mounting hole A B H H1 D L T8615* 1 2.0 Mpa 32-1300cst A(0.03)           B(0.06)              C(0.10)                  D(0.16) 3 6 10 16 M10X1 / / / / / / / T8616* 2 3-Φ5.5 36 13.5 58 18 Φ16 46 T8617* 3 2-Φ5.5 17 15.5 63 T8619* 4 34 80 T8618* 5 51 97 T8621* 1 A(0.10)           B(0.20)              C(0.40)                  D(0.60) 10 20 40 60 M12X1.25 / / / / / / / T8622* ...
  • Hot sale Factory Pump - Chain lubricating small brush – Jianhe

    Hot sale Factory Pump - Chain lubricating small brush – Jianhe

    Application It can be used for lubricating oil brush, chain oil brush, oiling machine oil brush, machine tool guide rail lubrication nylon brush, escalator oil brush, machine tool brush. Main  charateristics Use a brush to regularly refuel the inner and outer chain plates at the loose side of the chain, 8 hours/Time The quantity and period of oil should be sufficient to prevent the lubricating oil at the chain loop from discoloring. In the high speed range (U greater than 5m / s);In the low...
  • Short Lead Time for Lubricant Line - Hoses, Tubes And Fittings – Jianhe

    Short Lead Time for Lubricant Line - Hoses, Tubes And Fittings – Jianhe

    Hydraulic Lubrication Hose(Grease Hose) Characteristics ● High pressure hose with grease is equipped with the screw sleeve (threaded sleeve) and a hose stud (pipe fitting)at its respective line ends and thus ready for connection ● Cost savings, the hose can be taken according to the actual length of use. ● For the installation of the screw sleeve and the hose stud, the mechanic will require no special tools. Easy to disassemble and assemble. Tighten the nut. ●Composite resin hose: This ...
  • Best quality Oil Lubricator - HP-5  Small volume hand plastic piston small portable manual pump – Jianhe

    Best quality Oil Lubricator - HP-5 Small volume hand plastic piston small portable manual pump – Jianhe

    Specification Model No. Product code  Standard flow  Volume  Standard Working Pressure (Mpa) Lubrication point   Using oil viscosity Outlet  Handle  HP-5 10502/L 2-7   Ml/cyc (can adjusted) 0.5L 0.3Mpa with length of 15m, height of 3m and with 15 lubricating points. 32-250cst      Left /Middle /Right  10502/M M8*1 (For 4mm pipe ) 10502/R   The working principle : Hand pump handle pull down for oi absorption process . Handle reset for discharge process. Suitable for a day oi...
  • New Delivery for Lubricants Technology - DCR 1L/ 2L 220V Electromagnetic Automatic Lubricating oil pump  – Jianhe

    New Delivery for Lubricants Technology - DCR 1L/ 2L 220V Electromagnetic Automatic Lubricating oil pump – Jianhe

    Factory good sales with low price !! There have two type : 1 liter 2 liter electromagnetic lubrication pump, 220V, compact and durable, very suitable for the centralized lubrication system of small equipment. Working principle  The automatic lubricating oil pump for CNC machine is a pump that drives the piston to reciprocate and transport oil through the alternating electromagnetic force generated by the electromagnetic field. It has the characteristics of reasonable structure, reliable perfo...
  • OEM/ODM Factory Farm Trailer – DCR 1L/ 2L 220V Electromagnetic Automatic Lubricating oil pump  – Jianhe

    OEM/ODM Factory Farm Trailer – DCR 1L/ 2L 220V Electromagnetic Automatic Lubricating oil pump – Jianhe

    Factory good sales with low price !! There have two type : 1 liter 2 liter electromagnetic lubrication pump, 220V, compact and durable, very suitable for the centralized lubrication system of small equipment. Working principle  The automatic lubricating oil pump for CNC machine is a pump that drives the piston to reciprocate and transport oil through the alternating electromagnetic force generated by the electromagnetic field. It has the characteristics of reasonable structure, reliable perfo...