Car Oil Pump

We've been proud with the significant shopper fulfillment and wide acceptance due to our persistent pursuit of top of the range both of those on solution and repair for Car Oil Pump, Automotive Pumps, High Temperature Gear Pump, Hydraulic Pump Coupling, Our ultimate target is usually to rank as a top brand also to lead as a pioneer in our field. We are sure our profitable experience in tool generation will gain customer's trust, Wish to co-operate and co-create a far better foreseeable future with you! We insist on offering premium quality manufacturing with superior business concept, honest product sales as well as finest and fast assistance. it will bring you not only the good quality product or service and huge profit, but the most significant is to occupy the endless market for Car Oil Pump, Upon today, we have customers from all over the world, including USA, Russia, Spain, Italy, Singapore, Malaysia, Thailand, Poland, Iran and Iraq. The mission of our company is to provide the highest quality products with best price. We are looking forward to doing business with you!


  • Factory Promotional Hydraulic Motors High Torque - HP-5  Small volume hand plastic piston small portable manual pump – Jianhe

    Factory Promotional Hydraulic Motors High Torque - HP-5 Small volume hand plastic piston small portable manual pump – Jianhe

    Specification Model No. Product code  Standard flow  Volume  Standard Working Pressure (Mpa) Lubrication point   Using oil viscosity Outlet  Handle  HP-5 10502/L 2-7   Ml/cyc (can adjusted) 0.5L 0.3Mpa with length of 15m, height of 3m and with 15 lubricating points. 32-250cst      Left /Middle /Right  10502/M M8*1 (For 4mm pipe ) 10502/R   The working principle : Hand pump handle pull down for oi absorption process . Handle reset for discharge process. Suitable for a day oi...
  • China wholesale Hydraulic Pump Manufacturers - HT  Type Adjustable Oil Distributor ( For Resistance System ) – Jianhe

    China wholesale Hydraulic Pump Manufacturers - HT Type Adjustable Oil Distributor ( For Resistance System ) – Jianhe

    Adjustable needle distributor can be adjusted according to the different flow of each channel. The above model standard size is inlet M10*1 (connected to 6MM pipe), and the outlet is M8*1 (connected to 4MM pipe), and the opposite side of the main pipe port is blocked. Two type : Normal type or fast fix type .Applicable to the thin oil and butter lubrication system, the oil can be adjusted arbitrarily, and each oil outlet is provided with a check valve to prevent the oil from being discharged....
  • OEM Customized Food Grade Grease - T86 Grease/Oil Pressure Quantitative Dispenser – Jianhe

    OEM Customized Food Grade Grease - T86 Grease/Oil Pressure Quantitative Dispenser – Jianhe

    Model No. Number of Outlet Working Pressure Apply oil Standard Flow can choose (ml/cyc) Mark d (d1) Mounting hole A B H H1 D L T8615* 1 2.0 Mpa 32-1300cst A(0.03)           B(0.06)              C(0.10)                  D(0.16) 3 6 10 16 M10X1 / / / / / / / T8616* 2 3-Φ5.5 36 13.5 58 18 Φ16 46 T8617* 3 2-Φ5.5 17 15.5 63 T8619* 4 34 80 T8618* 5 51 97 T8621* 1 A(0.10)           B(0.20)              C(0.40)                  D(0.60) 10 20 40 60 M12X1.25 / / / / / / / T8622* ...
  • China wholesale Engine Lubrication - T86 Grease/Oil Pressure Quantitative Dispenser – Jianhe

    China wholesale Engine Lubrication - T86 Grease/Oil Pressure Quantitative Dispenser – Jianhe

    Model No. Number of Outlet Working Pressure Apply oil Standard Flow can choose (ml/cyc) Mark d (d1) Mounting hole A B H H1 D L T8615* 1 2.0 Mpa 32-1300cst A(0.03)           B(0.06)              C(0.10)                  D(0.16) 3 6 10 16 M10X1 / / / / / / / T8616* 2 3-Φ5.5 36 13.5 58 18 Φ16 46 T8617* 3 2-Φ5.5 17 15.5 63 T8619* 4 34 80 T8618* 5 51 97 T8621* 1 A(0.10)           B(0.20)              C(0.40)                  D(0.60) 10 20 40 60 M12X1.25 / / / / / / / T8622* ...
  • Manufactur standard Lubricant System - T86 Grease/Oil Pressure Quantitative Dispenser – Jianhe

    Manufactur standard Lubricant System - T86 Grease/Oil Pressure Quantitative Dispenser – Jianhe

    Model No. Number of Outlet Working Pressure Apply oil Standard Flow can choose (ml/cyc) Mark d (d1) Mounting hole A B H H1 D L T8615* 1 2.0 Mpa 32-1300cst A(0.03)           B(0.06)              C(0.10)                  D(0.16) 3 6 10 16 M10X1 / / / / / / / T8616* 2 3-Φ5.5 36 13.5 58 18 Φ16 46 T8617* 3 2-Φ5.5 17 15.5 63 T8619* 4 34 80 T8618* 5 51 97 T8621* 1 A(0.10)           B(0.20)              C(0.40)                  D(0.60) 10 20 40 60 M12X1.25 / / / / / / / T8622* ...
  • Factory Free sample Air Operated Grease Pump - HTD Series Electric Lubrication Pump – Jianhe

    Factory Free sample Air Operated Grease Pump - HTD Series Electric Lubrication Pump – Jianhe

    (2).Technical parameters and performance Motor rated speed Voltage Motor Power Standard pressure Max pressure No-load flow Volumetric efficiency oil viscosity Filtration accuracy Oil tank volume 1350rpm 110V 220V 380V 35W 20W 2.0 MPa 4.5 MPa 100ml/min 160ml/min Ref “P-Q “curve 20~2000cst 90μ 2L 3L 4L   Note: For motor voltage, please refer to the voltage label in the electric lubrication pump. (3).Appearance and installation dimensions (4).Pro...
  • China Gold Supplier for Hydraulic Test Pumps - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    China Gold Supplier for Hydraulic Test Pumps - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    1- The 1000/2000/3000 series distributors distribute and proportion incoming oil or grease to bearing points. A typical 100 distributor consists of an inlet section, three to nine valves and an end section. One assembly can serve up to a maximum of 18 lubrication points. 2- The 1000/2000/3000 Series distributors have a sliding discharge piston and built-in outlet check valves. Blocks are offered in three output sizes. The discharge capacity of a block is determined by varying the piston diame...
  • China New Product Brueninghaus Hydraulic Pump - ZLFG Oil Pressure Quantitative Dispenser – Jianhe

    China New Product Brueninghaus Hydraulic Pump - ZLFG Oil Pressure Quantitative Dispenser – Jianhe

    Timed, Quantitative, Scientific Transport BRAND JIANHE NAME ZLFG VOLUMETRIC -DISTRIBUTOR MODEL NO. ZLFG SURFACE POLISH ORIGINAL ZHEJIANG,JIAXING MATERIAL ALUMINUM ZLFG volumetric distributor, stores oil when the system is pressurized, and be oiling when the system is depressurized. This series can quantitatively deliver the lubricating oil to each lubrication point according to the specified main oil quantity specification. ZLFG series have two outlets, three outlets, four ...
  • Factory made hot-sale Lubrication Oils - Central Lubrication System Tube  Series – Jianhe

    Factory made hot-sale Lubrication Oils - Central Lubrication System Tube Series – Jianhe

      Name: Lubrication Pump Oil Pipe Category: nylon tubing, aluminum tubing, copper and aluminum tubing Model: 4mm, 6mm, 8mm Working Temperature: -30 ℃ -120℃ Length can customized MOQ :1M, can be customized by customers. High-quality and durable: The tubing is made of high-quality materials, high temperature resistance, acid and alkali resistance, corrosion resistance, and pressure resistance. long lasting. The tubing has strong vitality, good flexibility, tensile and explosion-proof resi...
  • Leading Manufacturer for Hydraulic Pump Gear - U-Block Grease Distributors – Jianhe

    Leading Manufacturer for Hydraulic Pump Gear - U-Block Grease Distributors – Jianhe

    Type  Oil outlet  U-6 4 U-6 6 U-8 8 U-10 10 U-12 12 Specification Inlet  Outlet  Discharge capacity (ml/cyc) Operating pressure (Mpa) Install hole distance intall thread  Size of U Block  Rp 1/4(6mm ) Rp1/8 (4mm ) 0.3 15Mpa for grease  45*54 2-M6 59*68*51.5 59*68*66.5 Technical Operating pressure : 3Mpa for oil or 15Mpa for grease Discharge : 0.3ml/cyc Lubricant viscosity (under standard temperature): oil≥N68, Grease : NLGI 000#~1#. Ambient temperature : -10...
  • Low MOQ for Oil Systems - T86 Grease/Oil Pressure Quantitative Dispenser – Jianhe

    Low MOQ for Oil Systems - T86 Grease/Oil Pressure Quantitative Dispenser – Jianhe

    Model No. Number of Outlet Working Pressure Apply oil Standard Flow can choose (ml/cyc) Mark d (d1) Mounting hole A B H H1 D L T8615* 1 2.0 Mpa 32-1300cst A(0.03)           B(0.06)              C(0.10)                  D(0.16) 3 6 10 16 M10X1 / / / / / / / T8616* 2 3-Φ5.5 36 13.5 58 18 Φ16 46 T8617* 3 2-Φ5.5 17 15.5 63 T8619* 4 34 80 T8618* 5 51 97 T8621* 1 A(0.10)           B(0.20)              C(0.40)                  D(0.60) 10 20 40 60 M12X1.25 / / / / / / / T8622* ...
  • Top Suppliers Gear Pumps For Oil - XEP20/XEP20A  Hand grease plunger pump – Jianhe

    Top Suppliers Gear Pumps For Oil - XEP20/XEP20A Hand grease plunger pump – Jianhe

    Performance and characteristics ●Plunger type volumetric pump, transparent resin tank. ●Manual operation, store grease when the handle is pulled out, and drain grease when pushing the handle. ● Small size, easy to install and use. ●XEP20 has no unloading function, and is connected with damped grease distributor and damped grease fittings matching. ●XEP20A has manual unloading function, and pressurized and pressure-relieving quantitative grease Matching kit. ● Use medium: 000#, 00#, or 0# lith...