Bearing Lubricant

Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of Bearing Lubricant, Crude Oil Pumps, Mini Gear Pump, Daikin Hydraulic Pumps, We sincerely welcome both foreign and domestic business partners, and hope to work with you in the near future! Dedicated to strict high-quality management and considerate purchaser support, our experienced employees members are usually available to discuss your specifications and be certain full shopper satisfaction for Bearing Lubricant, Our products are produced with the best raw materials. Every moment, we constantly improve the production programme. In order to ensure better quality and service, we have been focusing on the production process. We have got high praise by partner. We are looking forward to establishing business relationship with you.


  • High definition Motor Oil Pump - PV/PVS Resistance Distributor( For Resistance System ) – Jianhe

    High definition Motor Oil Pump - PV/PVS Resistance Distributor( For Resistance System ) – Jianhe

    1.The distributor is divided into two categories: single split and Double-way split. Used in resistive lubrication systems. 2.The Φ4 /Φ6 main oil pipeline through it to divert. Inlet /Outlet threads are M8X1/M10x1 which is matched by GN-4/GN-6 oil pipe connector and GB-4/GB-6 Oil Pile Sleeve 3.The resistive FHA metering element delivers the oil directly through it to the lubrication point. 4.Connect the equipment directly is FHB metering element. Model to choose    Model No. Oil Out...
  • 100% Original Factory Electrical Hydraulic Pump - RH Oil Pressure Volumetric Distributor – Jianhe

    100% Original Factory Electrical Hydraulic Pump - RH Oil Pressure Volumetric Distributor – Jianhe

    The Specifications And Technical Parameters Model No. Outlet  Oil Standard Working Pressure (Mpa) *Discharge Oil Size Mark Outsize 1 2 3 4 L A  Oil flow (ml/time) /Mark  RH-3200 2way  32-1300cst 1.0-2.0 0.1/10 0.2/20 0.3/30 0.4/40 39 49 RH-3300 3way  54 64 RH-3400 4way  72 82 RH-3500 5way  84 94 •The volumetric distributor is a pressure-reducing action type,the pressure oil delivered by the lubrication pump pushes the piston in the metering part, and the oil is stored ...
  • 2018 New Style Air Grease Guns - BE2232 Series Electric Oil/Grease Lubrication Pump(GEAR TYPE) – Jianhe

    2018 New Style Air Grease Guns - BE2232 Series Electric Oil/Grease Lubrication Pump(GEAR TYPE) – Jianhe

    NAME FULL SET CENTRAL LUBRICATION PUMP MODEL NO. BE2232 TYPE  MATERIAL  DIE-CAST ALUMINUM +RESIN MATERIAL ORIGINAL  ZHEJIANG,,JIAXING  FEATURE LONG LIFE   Specification Model Structure Flow  (ml/min) Max pressure       (kgf/cm2) Lubricating point Oil Viscosity (mm2/s) Low oil level reminders Motor  Tank volume (L) Weight Votage   power  (W) frequency(HZ) BE2232-1.5 Automatic With  timer or without timer 100-150 15-17 1-180 30-1200 Have  AC110V/   AC220V 28 50/60 1.5 2.4...
  • Professional Design Grease And Lubricant - M20*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Professional Design Grease And Lubricant - M20*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Performance and characteristics 1. This pump unit series is specially designed for the pump unit of the electric piston pump. 2. The ow rate is 0. 127ml/cyc 3. When install on pump match a check valve to prevent the discharged grease from owing 4. We can Set an overpressure indicator rod ,The overow grease will return to the grease drum with a Rotary joint. 5. Nominal Pressure 20 MPa. The highest working pressure: 35MPa. (can adjust) 6. Pressure Gauge Y-501,Measure Range 0-40Mpa 7. Applicab...
  • Special Price for Nachi Hydraulic Pumps - Hoses, Tubes And Fittings – Jianhe

    Special Price for Nachi Hydraulic Pumps - Hoses, Tubes And Fittings – Jianhe

    Hydraulic Lubrication Hose(Grease Hose) Characteristics ● High pressure hose with grease is equipped with the screw sleeve (threaded sleeve) and a hose stud (pipe fitting)at its respective line ends and thus ready for connection ● Cost savings, the hose can be taken according to the actual length of use. ● For the installation of the screw sleeve and the hose stud, the mechanic will require no special tools. Easy to disassemble and assemble. Tighten the nut. ●Composite resin hose: This ...
  • China Supplier Hand Pump - BE2232 Series Electric Oil/Grease Lubrication Pump(GEAR TYPE) – Jianhe

    China Supplier Hand Pump - BE2232 Series Electric Oil/Grease Lubrication Pump(GEAR TYPE) – Jianhe

    NAME FULL SET CENTRAL LUBRICATION PUMP MODEL NO. BE2232 TYPE  MATERIAL  DIE-CAST ALUMINUM +RESIN MATERIAL ORIGINAL  ZHEJIANG,,JIAXING  FEATURE LONG LIFE   Specification Model Structure Flow  (ml/min) Max pressure       (kgf/cm2) Lubricating point Oil Viscosity (mm2/s) Low oil level reminders Motor  Tank volume (L) Weight Votage   power  (W) frequency(HZ) BE2232-1.5 Automatic With  timer or without timer 100-150 15-17 1-180 30-1200 Have  AC110V/   AC220V 28 50/60 1.5 2.4...
  • Factory made hot-sale Nachi Pumps - M22*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Factory made hot-sale Nachi Pumps - M22*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Performance and characteristics 1. This pump unit series is specially designed for the pump unit of the electric piston pump. 2, The flow rate is 0.12,0. 16, 0. 20 ml/cyc 3. Nominal Pressure 20 MPa. The highest working pressure: 35MPa. (can adjust) 4.7.Applicable Medium :NLGI NO # 000-2 3.Pump Unit Install drawing  Specification  No. Plunger Diameter Nominal Pressure Pump unit flow rate Connection thread ZS-1 (K-6) Φ 6 20Mpa 0.12 ml/cyc M22*1.5 ZS-2 (K-6) Φ 7 0.16 ml/cyc M22*1.5 ZS...