Auto Lube Systems

continue to enhance, to be certain solution top quality in line with market and buyer standard requirements. Our corporation has a excellent assurance program are actually established for Auto Lube Systems, How Gear Pumps Work, Geared Pump, Grease Dispenser, Together with our efforts, our products have won the trust of customers and been very salable both here and abroad. The organization upholds the philosophy of "Be No.1 in good quality, be rooted on credit history and trustworthiness for growth", will keep on to provide previous and new customers from home and overseas whole-heatedly for Auto Lube Systems, we sincerely hope to establish a good and long-term business relationship with your esteemed company through this opportunity, based on equality, mutual benefit and win-win business from now to the future. "Your satisfaction is our happiness".


  • Top Suppliers Haldex Barnes Gear Pump - T86 Grease/Oil Pressure Quantitative Dispenser – Jianhe

    Top Suppliers Haldex Barnes Gear Pump - T86 Grease/Oil Pressure Quantitative Dispenser – Jianhe

    Model No. Number of Outlet Working Pressure Apply oil Standard Flow can choose (ml/cyc) Mark d (d1) Mounting hole A B H H1 D L T8615* 1 2.0 Mpa 32-1300cst A(0.03)           B(0.06)              C(0.10)                  D(0.16) 3 6 10 16 M10X1 / / / / / / / T8616* 2 3-Φ5.5 36 13.5 58 18 Φ16 46 T8617* 3 2-Φ5.5 17 15.5 63 T8619* 4 34 80 T8618* 5 51 97 T8621* 1 A(0.10)           B(0.20)              C(0.40)                  D(0.60) 10 20 40 60 M12X1.25 / / / / / / / T8622* ...
  • Factory Promotional Gas Pump - HT  Type Adjustable Oil Distributor ( For Resistance System ) – Jianhe

    Factory Promotional Gas Pump - HT Type Adjustable Oil Distributor ( For Resistance System ) – Jianhe

    Adjustable needle distributor can be adjusted according to the different flow of each channel. The above model standard size is inlet M10*1 (connected to 6MM pipe), and the outlet is M8*1 (connected to 4MM pipe), and the opposite side of the main pipe port is blocked. Two type : Normal type or fast fix type .Applicable to the thin oil and butter lubrication system, the oil can be adjusted arbitrarily, and each oil outlet is provided with a check valve to prevent the oil from being discharged....
  • PriceList for Cessna Hydraulic Pump - MVB Progressive Systems Metering Devices   – Jianhe

    PriceList for Cessna Hydraulic Pump - MVB Progressive Systems Metering Devices – Jianhe

    The MVB series progressive distributor is designed for small-size progressive lubrication systems. They are a cost efficient solution for supplying multiple lubrication points with relatively small volumes of oil and grease. The MVB series can be used with machine tools, processing machinery, presses, textile, printing and packaging machinery. The MVB is also suitable for mobile applications, including off-road equipment. 1 Oil Outlet  MVB Standard Flow : 0.17ml 2 Distribution principle The ...
  • Factory wholesale Lubricating Pumps - M20*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Factory wholesale Lubricating Pumps - M20*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Performance and characteristics 1. This pump unit series is specially designed for the pump unit of the electric piston pump. 2. The ow rate is 0. 127ml/cyc 3. When install on pump match a check valve to prevent the discharged grease from owing 4. We can Set an overpressure indicator rod ,The overow grease will return to the grease drum with a Rotary joint. 5. Nominal Pressure 20 MPa. The highest working pressure: 35MPa. (can adjust) 6. Pressure Gauge Y-501,Measure Range 0-40Mpa 7. Applicab...
  • 2018 Good Quality Internal Gear Pump Manufacturers - Spring Sheath Use For Oil lubrication system – Jianhe

    2018 Good Quality Internal Gear Pump Manufacturers - Spring Sheath Use For Oil lubrication system – Jianhe

    Description  Spring sheath use for Oil lubrication system Use for all Poor environment Applicable temperature: -10 °C-80 °C Advantage : High strength, stable elasticity, good hardness, full density without gaps, a single 30 cm can be upright following the movement of the wire-carrying guide of the use equipment, which can effectively protect the tubing from high temperature cutting and abrasion. Specification  Type Inner Dia mm  Out Dia mm  spring material diameter  Weight TH-4 4.4 5.6 ...
  • Excellent quality Vickers Pumps Parts - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    Excellent quality Vickers Pumps Parts - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    1- The 1000/2000/3000 series distributors distribute and proportion incoming oil or grease to bearing points. A typical 100 distributor consists of an inlet section, three to nine valves and an end section. One assembly can serve up to a maximum of 18 lubrication points. 2- The 1000/2000/3000 Series distributors have a sliding discharge piston and built-in outlet check valves. Blocks are offered in three output sizes. The discharge capacity of a block is determined by varying the piston diame...
  • Best Price on Hydraulic Intensifier Pump - HT  Type Adjustable Oil Distributor ( For Resistance System ) – Jianhe

    Best Price on Hydraulic Intensifier Pump - HT Type Adjustable Oil Distributor ( For Resistance System ) – Jianhe

    Adjustable needle distributor can be adjusted according to the different flow of each channel. The above model standard size is inlet M10*1 (connected to 6MM pipe), and the outlet is M8*1 (connected to 4MM pipe), and the opposite side of the main pipe port is blocked. Two type : Normal type or fast fix type .Applicable to the thin oil and butter lubrication system, the oil can be adjusted arbitrarily, and each oil outlet is provided with a check valve to prevent the oil from being discharged....
  • Special Price for Log Splitter Pumps - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    Special Price for Log Splitter Pumps - 1000/2000 /3000 Progressive Systems Metering Devices – Jianhe

    1- The 1000/2000/3000 series distributors distribute and proportion incoming oil or grease to bearing points. A typical 100 distributor consists of an inlet section, three to nine valves and an end section. One assembly can serve up to a maximum of 18 lubrication points. 2- The 1000/2000/3000 Series distributors have a sliding discharge piston and built-in outlet check valves. Blocks are offered in three output sizes. The discharge capacity of a block is determined by varying the piston diame...
  • Renewable Design for Plessey Hydraulic Pump - M22*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Renewable Design for Plessey Hydraulic Pump - M22*1.5 Black Pump Element Use for Pump Plunger Of Spring Plunger For Piston Lubrication Pump – Jianhe

    Performance and characteristics 1. This pump unit series is specially designed for the pump unit of the electric piston pump. 2, The flow rate is 0.12,0. 16, 0. 20 ml/cyc 3. Nominal Pressure 20 MPa. The highest working pressure: 35MPa. (can adjust) 4.7.Applicable Medium :NLGI NO # 000-2 3.Pump Unit Install drawing  Specification  No. Plunger Diameter Nominal Pressure Pump unit flow rate Connection thread ZS-1 (K-6) Φ 6 20Mpa 0.12 ml/cyc M22*1.5 ZS-2 (K-6) Φ 7 0.16 ml/cyc M22*1.5 ZS...
  • Free sample for Bosch Hydraulic Pumps - Y-6/Y-8 Plunger type Hand Oil lubrication pump – Jianhe

    Free sample for Bosch Hydraulic Pumps - Y-6/Y-8 Plunger type Hand Oil lubrication pump – Jianhe

    Specification Model  Outlet Oil Pipe    diamter  Max Pressure Discharge per stroke (ml/cyc) Lubrication Points Tank Capacity Viscosity Outlet number Y-6 4MM/6MM 1.5Mpa   (15kgf/cm2) 8 30 350 (ML) 20-150cst Can one side or two side  Y-8 4MM/6MM 500 (ML) Application  widely used for lubrication of small and medium sized mechanical equipment pressure machine, milling machine,CNC machine tools, machining centers, production lines, machine tools, forging, textiles, plastics, wood...
  • Hot sale Factory Hydraulic Oil Pumps - Central Lubrication System Tube  Series – Jianhe

    Hot sale Factory Hydraulic Oil Pumps - Central Lubrication System Tube Series – Jianhe

      Name: Lubrication Pump Oil Pipe Category: nylon tubing, aluminum tubing, copper and aluminum tubing Model: 4mm, 6mm, 8mm Working Temperature: -30 ℃ -120℃ Length can customized MOQ :1M, can be customized by customers. High-quality and durable: The tubing is made of high-quality materials, high temperature resistance, acid and alkali resistance, corrosion resistance, and pressure resistance. long lasting. The tubing has strong vitality, good flexibility, tensile and explosion-proof resi...